By using poly(acrylonitrile‐co‐vinyl acetate) as a gelator in an acetonitrile‐based liquid electrolyte, an in situ gelation of the liquid electrolyte can be performed inside the mesoporous matrix of TiO2 films. By introduction of TiO2 nanoparticles as fillers of the gel‐electrolyte, the energy conversion efficiency of a gel‐state dye‐sensitized solar cell can achieve a value higher than that of a liquid‐state cell.

Poly(acrylonitrile-co-vinyl acetate) (PAN-VA) is utilized as a gelation agent to prepare gel-state electrolytes for dye-sensitized solar cell (DSSC) applications. Based on the synergistic effect of PAN-VA and TiO(2) fillers in the electrolyte, the gel-state DSSC can achieve a conversion efficiency higher than that of a liquid counterpart. The high performance of the gel-electrolyte is attributed to the in situ gelation property of the gel-electrolyte, the contribution of the PAN-VA to the charge transfer, as well as the enhancement effect of TiO(2) fillers on the charge transfer at the Pt-electrolyte interface. The experimental results show that the efficiencies of the gel-state cells have little dependence on the conductivity of the electrolytes with various contents of PAN-VA, but are closely related to the penetration situation of the electrolyte in the TiO(2) film. For PAN-VA concentrations ≤15 wt%, the electrolyte can be easily injected at room temperature based on its in situ gelation property. For higher PAN-VA concentrations, good penetration of the high viscous electrolyte can be achieved by elevating the operation temperature. By utilizing a heteroleptic ruthenium dye (coded CYC-B11), gel-state DSSCs with an efficiency of above 10% are obtained. Acceleration tests show that the cell is stable under one-sun illumination at 60 °C.

No abstract

No abstract

No abstract