Insulated isothermal PCR (iiPCR), established on the basis of Ralyeigh-Bénard convection, is a rapid and low-cost platform for nucleic acid amplification. However, the method used for signal detection, namely gel electrophoresis, has limited the application of iiPCR. In this study, TaqMan probe-based iiPCR system was developed to obviate the need of post-amplification processing. This system includes an optical detection module, which was designed and integrated into the iiPCR device to detect fluorescent signals generated by the probe. TaqMan probe-iiPCR assays targeting white spot syndrome virus (WSSV) and infectious myonecrosis virus were developed for preliminary evaluation of this system. Significant elevation of fluorescent signals was detected consistently among positive iiPCR reactions in both assays, correlating with amplicon detection by gel electrophoresis analysis. After condition optimization, a threshold value of S/N (fluorescent intensityafter/fluorescent intensitybefore) for positive reactions was defined for WSSV TaqMan probe-iiPCR on the basis of 20 blank reactions. WSSV TaqMan probe-iiPCR generated positive S/Ns from as low as 101 copies of standard DNA and lightly infected Litopenaeus vannamei. Compared with an OIE-certified nested PCR, WSSV TaqMan probe-iiPCR showed a sensitivity of 100% and a specificity of 96.67% in 120 WSSV-free or lightly infected shrimp samples. Generating positive signals specifically and sensitively, TaqMan probe-iiPCR system has a potential as a low-cost and rapid on-site diagnostics method.

Rayleigh-Bénard convective PCR is a simple and effective design for amplification of DNA. Convective PCR is, however, extremely sensitive to environmental temperature fluctuations, especially when using small- diameter test tubes. Therefore, this method is inherently unstable with limited applications. Here, we present a convective PCR device that has been modified by adding thermal baffles. With this thermally baffled device the influence from fluctuations in environmental temperature were significantly reduced, even in a wind tunnel (1 m/s). The thermally baffled PCR instrument described here has the potential to be used as a low-cost, point-of-care device for PCR-based molecular diagnostics in the field.

In this study, a nanoimprinting method was introduced to fabricate polycarbonate films with transparent and flexible photonic crystal (FPC) structures. The fabricated flexible polymer films display a full-color grating because of the nanohemispherical structures on the surface. Through the Bragg diffraction formula, it was confirmed that the FPC polymer films transfer a part of the light energy to the second-order diffraction spectrum. Furthermore, the full-color grating properties can be modulated through geometric deformation because of the film’s elasticity. Additionally, anticounterfeiting features were also successfully achieved when the polymer films were either engraved with drawings and bent or patterned with fluorophores, which can be revealed under ultraviolet light. The most important aspect of this research is that the preparation of this FPC-structured polymer film is inexpensive and convenient, enabling the mass production of a new generation of smart materials.

Coil-in-coil carbon nanocoils (CNCs) were synthesized by means of acetylene decomposition using nickel nanoparticles as catalysts. The investigations revealed that there are often several CNCs self-assembled in one nanospring. The yield of coil-in-coil CNCs was high up to 11 g in each run at the decomposition temperature of 450 degrees C. CNC nanodevices were fabricated for systematical examinations of charge conduction in the single CNC and in the electrical contacts. A focused laser beam of about 70 mum in diameter was applied for selective annealing CNC nanodevices so as to improve the electrical contacts to the CNC. Our study showed that the selective focused laser annealing technique is an effective route to improve the electrical contacts to the nanodevice. Temperature-dependent CNC resistances are analyzed with the Mott-variable range hopping (VRH) and Efros-Shklovskii VRH model, revealing electron hopping conduction in the disordered CNCs with a characteristic length of about 5-50 nm.

We report on the theoretical derivation and experimental observation of spatiotemporal modulation instability (MI) of a coherent light beam in noninstantaneous nonlinear media. We obtain analytically the MI growth rate as a function of the spatial and temporal frequencies of the perturbation and the material response time. In the experiment, we observe that the varying speed of the MI patterns increases with the decreased material response time. We also observe that increasing the material response time can arrest the MI, agreeing with our theoretical derivation.

We study the instability suppression of vector-necklace-ring soliton clusters carrying zero, integer, and fractional angular momentums in nonlocal nonlinear media with an arbitrary degree of nonlocality. We show that the combination of nonlocality and mutual trapping of soliton constituent components can completely stabilize the vector-necklace-ring soliton clusters which are otherwise only quasistable in local media. Our results may be useful to studies of the novel soliton states in Bose-Einstein with dipolar long-range interactions

No abstract

No abstract