Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
REPORT DATE (DD-MM-YYYY)December 2005
ARL-TR-3681
SPONSOR/MONITOR'S ACRONYM(S) 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES)
SPONSOR/MONITOR'S REPORT NUMBER(S)
DISTRIBUTION/AVAILABILITY STATEMENTApproved for public release; distribution is unlimited.
SUPPLEMENTARY NOTES
ABSTRACTStyrene and methacrylated fatty acid (MFA) monomers were used as reactive diluents in the vinyl ester resins. The viscosities of these resins were measured as a function of reactive diluent content and type, temperature, and vinyl ester molecular weight to determine the operating window for composite manufacture. The viscosity decreased exponentially with reactive diluent content. Styrene and MFA monomers affected the viscosity in the same manner, but not to the same extent. The viscosities of resins using both diluents were accurately predicted using a logarithmic rule of mixtures from the two-component viscosity functions. The viscosity increased exponentially and predictably as a function of the vinyl ester number average molecular weight. Increasing the temperature decreased the viscosity in an Arrhenius manner. The activation energy for viscous flow decreased linearly as the diluent content increased, but was unaffected by vinyl ester molecular weight, fatty acid chain length, and unsaturation level. Overall, the resin viscosity was modeled as simple functions of the resin temperature, vinyl ester molecular weight, styrene content, MFA content, MFA chain length, and MFA unsaturation level, which are all known quantities for a formulated resin. Therefore, the operating window for various liquid molding operations was predicted for standard DGEBA-based vinyl ester resins and low VOC/HAP resins.
SUBJECT TERMSlow VOC vinyl esters, styrene, viscosity
