To study the rapid growth of research on organic photovoltaic (OPV) technology, development trends in the relevant research are analyzed based on CiteSpace software of text mining and visualization in scientific literature. By this analytical method, the outputs and cooperation of authors, the hot research topics, the vital references and the development trend of OPV are identified and visualized. Different from the traditional review articles by the experts on OPV, this work provides a new method of visualizing information about the development of the OPV technology research over the past decade quantitatively.

The determination of time since death or the postmortem interval (PMI) is one of the most important and frequently asked questions in forensic medicine. Medicolegal scholars and forensic pathologists around the world have studied the estimation of PMI extensively in the past, and many novel methods and advanced technologies have now been applied in the field. For several centuries, Chinese forensic examiners have also worked on the estimation of the PMI, and there are a large number of excellent studies published in Chinese rather than in English, and these are not easily accessible or known internationally. Therefore we have conducted a review of relevant studies published by Chinese forensic scholars in the last few decades. The scope of this review is to provide a concise summary of the current progress in the estimation of PMI by Chinese forensic researchers using molecular biology, spectroscopic technology, entomological methods, energy changes, thanatochemistry and other methods.

No abstract

In the low speed and heavy load of large machinery rotation or sliding parts, the application of copper base ink plate is very extensive. In this study, the graphene oxide‐polyethylene glycol (GO‐PEG) thin films were prepared on the surface of steel plates by gradient heating, and we simulated the friction and wear state of the solid material when it was brought to the metal surface. And the Fourier transform infrared spectroscopy, X‐ray diffraction, X‐ray energy spectrum analysis, Raman spectroscopy (Raman), and thermogravimetric analysis were used to characterize the structure and properties. The tribological results show that the GO‐PEG composite film prepared by gradient temperature rise method has good lubrication effect. The addition of GO greatly enhances the mechanical properties of the composite films. Compared with the single GO film, the friction coefficient is reduced by 50% and the wear rate is reduced by 85%. The unique characteristics of PEG solved the accumulation phenomenon caused by the strong van der Waals force between GO, then the PEG adhered on GO surfaces caused good lubrication effect. At the same time, the composite film has a broad application prospect in the working environment with little oil and no oil.

In this paper, graphene oxide/polyethylene glycol (GO/PEG) composite water‐based lubricant was prepared by an ultrasonic dispersion method, and characterized and analyzed by Fourier transform infrared (FT‐IR), Raman spectroscopy, X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The suspension performance of GO/PEG composite water‐based lubricant in water was verified by static sedimentation and centrifugation, and then, the prepared GO/PEG composite water‐based lubricant was added into 304 stainless steel and 6061 aluminum alloy, and the coefficient of friction (COF) curve, average COF value, average wear rate, corresponding photomicrographs of balls and disks after wear, and energy‐dispersive spectrometer (EDS) elemental analysis were used to illustrate the lubrication effect and lubrication mechanism. The results show that the GO/PEG composite water‐based lubricant possesses excellent suspension ability in water, and the average COF value and wear rate of GO/PEG composite water‐based lubricant are reduced by 78.8% and 88.8%, respectively, compared with water lubrication. The excellent lubrication effect of GO/PEG composite water‐based lubricant can effectively reduce the cold‐welding and adhesive wear phenomenon, mainly because GO/PEG composite water‐based lubricant first fills the uneven surface of friction mating to form a high‐quality lubricating film and then because of the special space structure of GO and the low shear between GO layers and the synergistic lubrication effect of GO/PEG.

The oxygen blast furnace (OBF) process has been extensively studied theoretically because of the potentials of promising energy conservation and CO2 emission reduction. Herein, investigations of the OBF process are reviewed and some suggestions for its future development are presented. The main findings can be condensed into the following: static and dynamic models of the OBF should be revised to considering the newest theoretical findings in the thermodynamics and kinetics involved as well as the particular limitations of the technology. Models focusing on energy demand and emissions should be further developed and applied to enhance the design for increased efficiency and sustainability of the complicated OBF system. It will be challenging to operate the full OBF process with top gas recycling (TGR). The development of mathematical models focusing on the practical operation is therefore warranted and would provide useful tools for tackling control problems and difficulties that will arise in forthcoming industrial trials. Considering these potential challenges, a medium oxygen‐enriched blast furnace with TGR as a forerunner is suggested because its operation conditions show greater resemblance with those of the traditional blast furnace. This furthermore provides a path of transition to the use of the full OBF in industrial scale.

In the age of big data, plenty of valuable sensing data have been shared to enhance scientific innovation. However, this may cause unexpected privacy leakage. Although numerous privacy preservation techniques, such as perturbation, encryption, and anonymization, have been proposed to conceal sensitive information, it is usually at the cost of the application utility. Moreover, most of the existing works did not distinguished the underlying factors, such as data features and sampling rate, which contribute differently to utility and privacy information implied in the shared data. To well balance the application utility and privacy leakage for data sharing, we utilize mutual information and visualization techniques to analyze the impact of the underlying factors on utility and privacy, respectively, and design an interactive visualization tool to help users identify the appropriate solution to achieve the objectives of high application utility and low privacy leakage simultaneously. To illustrate the effectiveness of the proposed scheme and tool, accelerometer data collected from mobile devices have been adopted as an illustrative example. Experimental study has shown that feature selection and sampling frequency play dominant roles in reducing privacy leakage with much less reduction on utility, and the proposed visualization tool can effectively recommend the appropriate combination of features and sampling rates that can help users make decision on the trade-off between utility and privacy.

Abstract. Chinese firms heavily invest in enterprise resource planning systems (ERP) in recent years and expect that ERP can help them gain superior financial performance. Given the high costs and high risk of ERP investments, to quanti I)! the fmancial benefits of ERP implementation is an important research issue. This paper empirically examines the impacts of ERP implementation on firm performance using the financial data from 50 Chinese chemical firms that implemented ERP. The firms' abnormal performance during the two-year implementation period and three-year post-implementation period was analyzed based on the guideline of Barber et al. on event studies. The results fmd no significant performance improvement during the implementation period and the three-year post-implementation period and a decline in performance in the first two years after implementation. However, a slight performance improvement in the third year after implementation may indicate that the financial benefits of ERP may show after a long-term ERP use. These results provide insight for Chinese firmS that want to invest in ERP.