The formation mechanisms of particulate pollution in Lanzhou, which used to be one of the most polluted cities across the world, remain unclear even though air pollution in Lanzhou has been improved in recent decades. Multiple online data during 2019-2020 winter was used to analyze the characteristics and reveal the formation mechanisms of particulate pollution in Lanzhou. Organic matter, nitrate, sulfate, and ammonium accounted for 35.8%, 16.6%, 12.7%, and 10.8%, respectively, of PM 2.5 mass. The contribution of secondary inorganic aerosols decreased from low to high particulate levels. Nitrate and ammonium concentrations consistently increased with increasing PM 2.5 while sulfate concentrations firstly increased but remained stagnant under high particulate conditions. The sulfur and nitrogen oxidation ratios exhibited relatively low values of 0.18 ± 0.12 and 0.11 ± 0.05, respectively. Nitrogen oxidation ratio showed little dependence on relative humidity because of limited aqueous phase generation of nitrate. The increasing nitrate to sulfate ratio and decreasing organic carbon to elemental carbon ratio under high particulate concentrations indicate relative decreasing contribution of coal burning and increasing contribution of vehicle exhaust emissions on particulate pollution. The rapid decreasing trend of secondary organic carbon to elemental carbon ratio under high particulate concentrations was attributed to a combination of the relatively decreasing photochemical generations and increasing accumulation of primary emissions by the weakened atmospheric diffusion ability. Our results suggest that controlling primary carbonaceous species and vehicle exhaust emissions is the most effective measure in order to sustainably mitigate particulate pollution in Lanzhou in the future.

No abstract

The assessment of atmospheric aerosol radiative effects in the Tibetan Plateau (TP) suffers from large uncertainties due to limited understanding of aerosol physicochemical properties. To quantify aerosol optical properties, size distributions, and chemical compositions in the western TP, an intensive field campaign was carried out at Shiquanhe National Reference Climatological Station from July 8 to August 2, 2019. Unexpected low single scattering albedo (SSA) at 870 nm was found for the fine aerosols with an average value of 0.73 ± 0.18. SSA was even lower than 0.60 in the morning when fine aerosols peaked, indicating high absorption of the fine aerosols induced by anthropogenic activities. Coarse mode aerosols accounted for 70.58% ± 14.98% of the total volume concentration and mineral dust was the most abundant species in total suspended particles with a mass fraction of 48.7%. Fine mode aerosol concentrations showed little dependence on wind speed while coarse mode aerosols and metallic element concentrations exhibited strong positive correlations with wind speed, indicating the importance of wind‐blown dust particles. The present study for the first time quantified key aerosol parameters in the western TP and unexpected high absorption of atmospheric aerosols were found over the site in summer. Our results suggest the need to carefully consider the radiative effects caused by aerosol absorption in the TP region.

No abstract

As-prepared hierarchical Ni0.5Co0.5O hollow nanospheres comprising ultra-thin nanosheets exhibit a superior specific capacity and excellent rate performance due to the abundant active sites and fascinating narrow-gap channel.

Flexible, heteroatoms-rich activated carbon nanofibers with fascinating cross-linked architectures are successfully gained in a facile and controllable way via electrospinning polyacrylonitrile (PAN) /dicyandiamide (DICY) composite nanofibers followed by carbonation and a CO 2 activation process. The unique inter-bonded structures and heteroatoms contents could be easily controlled by adjusting the preoxidation temperature applied in the calcining procedure and the addition of DICY. Significantly, the resultant samples display hierarchical pores with micro/meso/macropores, abundant N, O species doped and unique fiber-fiber interconnections, which considerably boost the electrochemical properties. As an electrode material, the activated N-doped cross-linked carbon nanofibers (ANCLCNFs) show a high capacitance of 323 F g −1 with a current density of 0.5 A g −1 , excellent rate capacity (230.1 F g −1 at 20 A g −1 ) and long-term duration (over 95% after 10000 cycles). Furthermore, the symmetrical supercapacitor delivers a maximum energy density of 14.3 Wh kg −1 at a power density of 162.5 W kg −1 .

No abstract

No abstract