Doping and ion substitution in colloidal metal halide perovskite nanocrystals and their implication on compositions, properties, and applications.
We report a simple and versatile approach to creating a highly transparent superhydrophobic surface with dual-scale roughness on the nanoscale. 3-Aminopropyltrimethoxysilane (APTS)-functionalized silica nanoparticles of two different sizes (100 and 20 nm) were sequentially dip coated onto different substrates, followed by thermal annealing. After hydrophobilization of the nanoparticle film with (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trichlorosilane for 30 min or longer, the surface became superhydrophobic with an advancing water contact angle of greater than 160° and a water droplet (10 μL) roll-off angle of less than 5°. The order of nanoparticles dip coated onto the silicon wafer (i.e., 100 nm first and 20 nm second or vice versa) did not seem to have a significant effect on the resulting apparent water contact angle. In contrast, when the substrate was dip coated with monoscale nanoparticles (20, 50, and 100 nm), a highly hydrophobic surface (with an advancing water contact angle of up to 143°) was obtained, and the degree of hydrophobicity was found to be dependent on the particle size and concentration of the dip-coating solution. UV-vis spectra showed nearly 100% transmission in the visible region from the glass coated with dual-scale nanoparticles, similar to the bare one. The coating strategy was versatile, and superhydrophobicity was obtained on various substrates, including Si, glass, epoxy resin, and fabrics. Thermal annealing enhanced the stability of the nanoparticle coating, and superhydrophobicity was maintained against prolonged exposure to UV light under ambient conditions.
We report a simple, robust, and inexpensive strategy to enable all-inorganic CsPbX3 perovskite nanocrystals (NCs) with a set of markedly improved stabilities, that is, water stability, compositional stability, phase stability, and phase segregation stability via impregnating them in solid organic salt matrices (i.e., metal stearate; MSt). In addition to acting as matrices, MSt also functions as the ligand bound to the surface of CsPbX3 NCs, thereby eliminating the potential damage of NCs commonly encountered during purification as in copious past work. Quite intriguingly, the resulting CsPbX3–MSt nanocomposites display an outstanding suite of stabilities. First, they retain high emission in the presence of water because of the insolubility of MSt in water, signifying their excellent water stability. Second, anion exchange between CsPbBr3–MSt and CsPbI3–MSt nanocomposites is greatly suppressed. This can be ascribed to the efficient coating of MSt, thus effectively isolating the contact between CsPbBr3 and CsPbI3 NCs, reflecting notable compositional stability. Third, remarkably, after being impregnated by MSt, the resulting CsPbI3–MSt nanocomposites sustain the cubic phase of CsPbI3 and high emission, manifesting the strikingly improved phase stability. Finally, phase segregation of CsPbBr1.5I1.5 NCs is arrested via the MSt encapsulation (i.e., no formation of the respective CsPbBr3 and CsPbI3), thus rendering pure and stable photoluminescence (i.e., demonstration of phase segregation stability). Notably, when assembled into typical white light-emitting diode architecture, CsPbBr1.5I1.5–MSt nanocomposites exhibit appealing performance, including a high color rendering index (R a) and a low color temperature (T c). As such, the judicious encapsulation of perovskite NCs into organic salts represents a facile and robust strategy for creating high-quality solid-state luminophores for use in optoelectronic devices.
A stretchable, flexible, and bendable random laser system capable of lasing in a wide range of spectrum will have many potential applications in next- generation technologies, such as visible-spectrum communication, superbright solid-state lighting, biomedical studies, fluorescence, etc. However, producing an appropriate cavity for such a wide spectral range remains a challenge owing to the rigidity of the resonator for the generation of coherent loops. 2D materials with wrinkled structures exhibit superior advantages of high stretchability and a suitable matrix for photon trapping in between the hill and valley geometries compared to their flat counterparts. Here, the intriguing functionalities of wrinkled reduced graphene oxide, single-layer graphene, and few-layer hexagonal boron nitride, respectively, are utilized to design highly stretchable and wearable random laser devices with ultralow threshold. Using methyl-ammonium lead bromide perovskite nanocrystals (PNC) to illustrate the working principle, the lasing threshold is found to be ≈10 µJ cm , about two times less than the lowest value ever reported. In addition to PNC, it is demonstrated that the output lasing wavelength can be tuned using different active materials such as semiconductor quantum dots. Thus, this study is very useful for the future development of high-performance wearable optoelectronic devices.
Dual-functional devices that can simultaneously detect light and emit light have a tremendous appeal for multiple applications, including displays, sensors, defense, and high-speed optical communication. Despite the tremendous efforts of scientists, the progress of integration of a phototransistor, where the built-in electric field separates the photogenerated excitons, and a light-emitting diode, where the radiative recombination can be enhanced by band offset, into a single device remains a challenge. Combining the superior properties of perovskite quantum dots (PQDs) and graphene, here we report a light-emissive, ultrasensitive, ultrafast, and broadband vertical phototransistor that can simultaneously act as an efficient photodetector and light emitter within a single device. The estimated value of the external quantum efficiency of the vertical phototransistor is ∼1.2 × 10 10 % with a photoresponsivity of >10 9 A W −1 and a response time of <50 μs, which exceed all the presently reported vertical phototransistor devices. We also demonstrate that the modulation of the Dirac point of graphene efficiently tunes both amplitude and polarity of the photocurrent. The device exhibits a green emission having a quantum efficiency of 5.6%. The moisture-insensitive and environmentally stable, light-emissive, ultrafast, and ultrasensitive broadband phototransistor creates a useful route for dual-functional optoelectronic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.