Ziziphus jujube known as red dates are natural flora, are a rich source of antioxidant bioactive compounds and are widely used in making Chinese traditional medicine. However, the optimization of extraction conditions and demonstration of extraction kinetics of red dates remains a gap. Therefore, the main objective of this research was to enhance the antioxidant activity via DPPH, crude extract yield, and TPC by response surface methodology (RSM). Also, mathematical modeling of the TPC extraction kinetics was performed. Single-factor experiments were adopted to identify the preliminary RSM ranges of four extraction parameters such as liquid-solid ratio (10, 20, and 30 ml/g), extraction temperature (50, 60 and 70°C), time (40, 50 and 60min), and ultrasonic power (70, 80 and 90%). The extraction kinetics based on RSM optimized conditions were modeled into six extraction kinetic models. As result, the highest crude extract yield (4.56 g), highest TPC (0.023 g GAE/g extract), and highest antioxidant activity (85.88%) were obtained at 60ºC. The optimum values were liquid-solid ratio 30ml/g, extraction temperature 60°C, time 60 min, and ultrasonic power 70%. The antioxidant activity of red dates after optimization (90.59%) was higher than that of synthetic antioxidants, Butylated Hydroxytoluene (84.71%), and Butylated Hydroxyanisole (77.73%). Furthermore, the best-fitted kinetic model was the second-order kinetic model due to its coefficient of determination (R2) at 0.9849, being the closest to 1 and its root mean square error (RMSE) was the lowest, 0.001028 among other models.

Abstract.Red dates are one of the most famous herbal plants in making traditional Chinese medicine. They contain large amount of bioactive compounds. The objectives of this research were to optimise the crude extract yield and total phenolic compounds (TPC) yield from red dates using response surface methodology (RSM) and model the extraction kinetics of TPC yield from red dates. Date fruits were dried in an oven under temperatures 50°C, 60°C, 70°C and 80°C until a constant weight was obtained. The optimum drying temperature was 60°C as it gave the highest crude extract yield and TPC yield. Besides that, single factor experiments were used to determine the optimum range of four extraction parameters which were: liquid-solid ratio (10-30 ml/g); ultrasonic power (70-90%); extraction temperature (50-70°C); and extraction time (40-60min). The optimum range of the four parameters were further optimised using the Box-Behken Design (BBD) of RSM. The extraction conditions that gave the highest crude extract yield and TPC yield were chosen. The optimum value for liquid-solid ratio, ultrasonic power, extraction temperature and extraction time were 30ml/g, 70%, 60°C and 60 min respectively. The two equations generated from RSM were reliable and can be used to predict the crude extract yield and TPC yield. The higher the extraction temperature, liquid-solid ratio, and extraction time and lower ultrasonic power, the higher the crude extract and TPC yield. Finally, the results of TPC yield versus time based on the optimum extraction parameters from RSM optimisation were fitted into three extraction kinetic models (Peleg's model, Page's model and Ponomaryov's model). It was found that the most suitable kinetic model to represent the extraction process of TPC from red dates was Page's model due to its coefficient of determination (R 2 ) was the closest to unity, 0.9663 while its root mean square error (RMSE) was the closest to zero, 0.001534.