We have developed an improved small-angle X-ray scattering (SAXS) model and analysis methodology to quantitatively evaluate the nanostructures of a blend system. This method has been applied to resolve the various structures of self-organized poly(3-hexylthiophene)/C61-butyric acid methyl ester (P3HT/PCBM) thin active layer in a solar cell from the studies of both grazing-incidence small-angle X-ray scattering (GISAXS) and grazing-incidence X-ray diffraction (GIXRD). Tuning the various length scales of PCBM-related structures by a different annealing process can provide a flexible approach and better understanding to enhance the power conversion of the P3HT/PCBM solar cell. The quantitative structural characterization by this method includes (1) the mean size, volume fraction, and size distribution of aggregated PCBM clusters, (2) the specific interface area between PCBM and P3HT, (3) the local cluster agglomeration, and (4) the correlation length of the PCBM molecular network within the P3HT phase. The above terms are correlated well with the device performance. The various structural evolutions and transformations (growth and dissolution) between PCBM and P3HT with the variation of annealing history are demonstrated here. This work established a useful SAXS approach to present insight into the modeling of the morphology of P3HT/PCBM film. In situ GISAXS measurements were also conducted to provide informative details of thermal behavior and temporal evolution of PCBM-related structures during phase separation. The results of this investigation significantly extend the current knowledge of the relationship of bulk heterojunction morphology to device performance.

No abstract

We demonstrate here that the nanostructure of poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PCBM) bulk heterojunction (BHJ) can be tuned by inorganic nanoparticles (INPs) for enhanced solar cell performance. The self-organized nanostructural evolution of P3HT/PCBM/INPs thin films was investigated by using simultaneous grazing-incidence small-angle X-ray scattering (GISAXS) and grazing-incidence wide-angle X-ray scattering (GIWAXS) technique. Including INPs into P3HT/PCBM leads to (1) diffusion of PCBM molecules into aggregated PCBM clusters and (2) formation of interpenetrating networks that contain INPs which interact with amorphous P3HT polymer chains that are intercalated with PCBM molecules. Both of the nanostructures provide efficient pathways for free electron transport. The distinctive INP-tuned nanostructures are thermally stable and exhibit significantly enhanced electron mobility, external quantum efficiency, and photovoltaic device performance. These gains over conventional P3HT/PCBM directly result from newly demonstrated nanostructure. This work provides an attractive strategy for manipulating the phase-separated BHJ layers and also increases insight into nanostructural evolution when INPs are incorporated into BHJs.

We simultaneously employed grazing incidence small-angle and wide-angle X-ray scattering (GISAXS and GIWAXS) techniques to quantitatively study the structural evolution and kinetic behavior of poly(3-hexylthiophene) (P3HT) crystallization, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) aggregation and amorphous P3HT/PCBM domains from a bulk heterojunction (BHJ) to a thermally unstable structure. The independent phase separation regimes on the nanoscale (∼10 nm), mesoscale (∼100 nm) and macroscale (∼μm) are revealed for the first time. Bis-PCBM molecules as inhibitors incorporated into the P3HT/PCBM blend films were adopted as a case study of a control strategy for improving the thermal stability of P3HT/PCBM solar cell. The detailed information on the formation, growth, transformation and mutual interaction between different phases during the hierarchical structural evolution of P3HT/PCBM:xbis-PCBM (x = 8-100%) blend films are presented herein. This systematic study proposes the mechanisms of thermal instability for a polymer/fullerene-based solar cell. We demonstrate a new fundamental concept that the structural evolution and thermal stability of mesoscale amorphous P3HT/PCBM domains during heating are the origin of controlling thermal instability rather than those of nanoscale thermally-stable BHJ structures. It leads to a low-cost and easy-fabrication control strategy for effectively tailoring the hierarchical morphology against thermal instability from molecular to macro scales. The optimum treatment achieving high thermal stability, control of mesoscale domains, can be effectively designed. It is independent of the original BHJ nanostructure design of a polymer/fullerene-based solar cell with high performance. It advances the general knowledge on the thermal instability directly arising from the nanoscale structure.

The aim of this study is to quantitatively investigate the effect of different fullerene type (PC 60 BM and PC 70 BM) on various morphological structures and power conversion efficiency (PCE) in the bulk heterojunction (BHJ) P3HT/PC x BM solar cells. The solar cells are fabricated by spin coating without thermal annealing. The quantitative investigations of three-dimensional selforganized nanostructures are performed by using combined grazingincidence small-and wide-angle X-ray scattering technique (GISAXS/GIWAXS). Two types of nanostructures are observed due to the phase separation in the BHJ films during the processing. They include (1) intercalated PC x BM molecules around boundary of P3HT crystalline domain and within amorphous domain and (2) aggregated PC x BM clusters in PC x BM domains. The lamellar spacing of P3HT crystalline domains in P3HT/PC 70 BM is larger than that in P3HT/PC 60 BM. This result indicates more interfacial areas are generated between PC 70 BM and P3HT at the molecular scale for more efficient charge separation. On the other hand, the size, volume fraction, partial attachment, and spatial distribution of PC 60 BM clusters are larger than that of PC 70 BM clusters, which reveals more efficient electron transport in P3HT/PC 60 BM. We deduce the correlation between nanostructures and PCE (3.25% and 2.64%, respectively, for P3HT/ PC 70 BM and P3HT/PC 60 BM). The structure of fullerene intercalated with P3HT rather than the size of fullerene cluster plays a major role in the PCE performance of BHJ solar cell without thermal annealing.