Bone tissue remodels throughout life in response to mechanical loads. Impaired activities of bone cells (osteocytes, osteoblasts and osteoclasts) result in a disruption of the bone remodelling cycle, which eventually leads to bone disorders such as osteoporosis. To develop efficient therapeutic strategies against bone disorders, new tools are needed to unravel the bone remodelling cycle at the molecular level. Here, we developed a microfluidic platform, which should allow understanding the bone remodelling cycle in much more detail and ultimately be used to discover new therapeutic compounds. We focused specifically on studying cell-cell communication between osteocytes and osteoblasts cells via connexin 43-gap junctions. Therefore, a new cell printing method was developed to create living cellular bone cell arrays in a microfluidic channel. Several cell printing designs where osteocytes and osteoblasts heterotypically interacted at localized interfaces were evaluated. Physical contacts between the bone cells were characterised at high resolution by correlative atomic force microscopy (AFM) - fluorescence microscopy. We demonstrated that the platform is compatible with single-cell mechanostimulation by AFM nanoindentation and subsequent fluorescent analysis of the mechanoresponse. As a proof of concept, we showed the functionality of the platform by analysing the induced in vivo-like Ca++ wave in the printed osteocyte-osteoblast network upon mechanical stimulation by fluid flow shear stress.

Campylobacteriosis is a widespread infectious disease, leading to a major health and economic burden. Chickens are considered as the most common infection source for humans. Campylobacter mainly multiplies in the mucus layer of their caeca. No effective control measures are currently available, but passive immunisation of chickens with pathogen-specific maternal IgY antibodies, present in egg yolk of immunised chickens, reduces Campylobacter colonisation. To explore this strategy further, anti-Campylobacter nanobodies, directed against the flagella and major outer membrane proteins, were fused to the constant domains of chicken IgA and IgY, combining the benefits of nanobodies and the effector functions of the Fc-domains. The designer chimeric antibodies were effectively produced in leaves of Nicotiana benthamiana and seeds of Arabidopsis thaliana. Stable expression of the chimeric antibodies in seeds resulted in production levels between 1% and 8% of the total soluble protein. These in planta produced antibodies do not only bind to their purified antigens but also to Campylobacter bacterial cells. In addition, the anti-flagellin chimeric antibodies are reducing the motility of Campylobacter bacteria. These antibody-containing Arabidopsis seeds can be tested for oral passive immunisation of chickens and, if effective, the chimeric antibodies can be produced in crop seeds.

The fast emergence of multi-resistant pathogenic yeasts is caused by the extensive—and sometimes unnecessary—use of broad-spectrum antimicrobial drugs. To rationalise the use of broad-spectrum antifungals, it is essential to have a rapid and sensitive system to identify the most appropriate drug. Here, we developed a microfluidic chip to apply the recently developed optical nanomotion detection (ONMD) method as a rapid antifungal susceptibility test. The microfluidic chip contains no-flow yeast imaging chambers in which the growth medium can be replaced by an antifungal solution without disturbing the nanomotion of the cells in the imaging chamber. This allows for recording the cellular nanomotion of the same cells at regular time intervals of a few minutes before and throughout the treatment with an antifungal. Hence, the real-time response of individual cells to a killing compound can be quantified. In this way, this killing rate provides a new measure to rapidly assess the susceptibility of a specific antifungal. It also permits the determination of the ratio of antifungal resistant versus sensitive cells in a population.

Antibiotic resistance is nowadays a major public health issue. Rapid antimicrobial susceptibility tests (AST) are one of the options to fight this deadly threat. Performing AST with single-cell sensitivity that is rapid, cheap, and widely accessible, is challenging. Recent studies demonstrated that monitoring bacterial nanomotion by using atomic force microscopy (AFM) upon exposure to antibiotics constitutes a rapid and highly efficient AST. Here, we present a nanomotion detection method based on optical microscopy for testing bacterial viability. This novel technique only requires a very basic microfluidic analysis chamber, and an optical microscope equipped with a camera or a mobile phone. No attachment of the microorganisms is needed, nor are specific bacterial stains or markers. This single-cell technique was successfully tested to obtain AST for motile, nonmotile, gram-positive, and gram-negative bacteria. The simplicity and efficiency of the method make it a game-changer in the field of rapid AST.

Living cell microarrays in microfluidic chips allow the non-invasive multiplexed molecular analysis of single cells. Here, we developed a simple and affordable perfusion microfluidic chip containing a living yeast cell array composed of a population of cell variants (green fluorescent protein (GFP)-tagged Saccharomyces cerevisiae clones). We combined mechanical patterning in 102 microwells and robotic piezoelectric cell dispensing in the microwells to construct the cell arrays. Robotic yeast cell dispensing of a yeast collection from a multiwell plate to the microfluidic chip microwells was optimized. The developed microfluidic chip and procedure were validated by observing the growth of GFP-tagged yeast clones that are linked to the cell cycle by time-lapse fluorescence microscopy over a few generations. The developed microfluidic technology has the potential to be easily upscaled to a high-density cell array allowing us to perform dynamic proteomics and localizomics experiments.

Candida albicans is an emerging multidrug-resistant opportunistic pathogen representing an important source of invasive disease in humans and generating high healthcare costs worldwide. The development of a rapid and simple antifungal susceptibility test (AFST) could limit the spread of this disease, increase the efficiency of treatment, and lower the risk of developing resistant strains. We developed a microfluidic chip containing an array of microwells that were designed to trap the cells and perform rapid antifungal susceptibility tests using optical nanomotion detection (ONMD). Yeast cell entrapment in a microwell allows for a very rapid exchange of growth medium with the antifungal, which enables performing single-cell ONMD measurements on the same cell before and after antifungal treatment. The exposure to a low concentration of the antifungal caspofungin or flucanozole induced a significant decrease in the nanomotion signal, demonstrating the high sensitivity of this technique. We used this chip to quantify the real-time response of individual C. albicans cells to the antifungal treatment in as fast as 10 min. This simple and label-free technique could be further developed into a simple-to-use device that allows the performance of fast AFST as part of a routine hospital procedure in developed and also eventually developing world countries.

Hydrogen peroxide (H 2 O 2 ) acts as a signalling molecule by oxidising cysteine thiols in proteins. Recent evidence has established a role for cytosolic peroxiredoxins in transmitting H 2 O 2 -based oxidation to a multitude of target proteins. Moreover, it is becoming clear that peroxiredoxins fulfil their function in organised microdomains, where not all interactors are covalently bound. However, most studies aimed at identifying peroxiredoxin interactors were based on methods that only detect covalently linked partners. Here, we explore the applicability of two thiol-disulphide independent in-cell trapping methodological approaches in combination with mass spectrometry for the identification of interaction partners of peroxiredoxin 2 (Prdx2). The first is biotin-dependent proximity-labelling (BioID) with a biotin ligase A (BirA*)-fused Prdx2, which has never been applied on redox-active proteins. The second is crosslinker co-immunoprecipitation with an N-terminally His-tagged Prdx2. During the initial characterisation of the tagged Prdx2 constructs, we found that the His-tag, but not BirA*, compromises the peroxidase and signalling activities of Prdx2. Further, the Prdx2 interactors identified with each approach showed little overlap. We therefore concluded that BioID is a more reliable method than crosslinker co-immunoprecipitation. After a stringent mass spec data filtering, BioID identified 13 interactors under elevated H 2 O 2 conditions, including subunit five of the COP9 signalosome complex (CSN5). The Prdx2:CSN5 interaction was further confirmed in a proximity ligation assay. Taken together, our results demonstrate that BioID can be used as a method for the identification of interactors of Prdxs, and that caution should be exercised when interpreting protein-protein interaction results using tagged Prdxs.