Fe3O4 has long been regarded as a promising anode material for lithium ion battery due to its high theoretical capacity, earth abundance, low cost, and nontoxic properties. However, up to now no effective and scalable method has been realized to overcome the bottleneck of poor cyclability and low rate capability. In this article, we report a bottom-up strategy assisted by atomic layer deposition to graft bicontinuous mesoporous nanostructure Fe3O4 onto three-dimensional graphene foams and directly use the composite as the lithium ion battery anode. This electrode exhibits high reversible capacity and fast charging and discharging capability. A high capacity of 785 mAh/g is achieved at 1C rate and is maintained without decay up to 500 cycles. Moreover, the rate of up to 60C is also demonstrated, rendering a fast discharge potential. To our knowledge, this is the best reported rate performance for Fe3O4 in lithium ion battery to date.

A thin polymer shell helps V2O5 a lot. Short V2O5 nanobelts are grown directly on 3D graphite foam as a lithium-ion battery (LIB) cathode material. A further coating of a poly(3,4-ethylenedioxythiophene) (PEDOT) thin shell is the key to the high performance. An excellent high-rate capability and ultrastable cycling up to 1000 cycles are demonstrated.

Metal sulfides are an emerging class of high-performance electrode materials for solar cells and electrochemical energy storage devices. Here, a facile and powerful method based on anion exchange reactions is reported to achieve metal sulfide nanoarrays through a topotactical transformation from their metal oxide and hydroxide preforms. Demonstrations are made to CoS and NiS nanowires, nanowalls, and core-branch nanotrees on carbon cloth and nickel foam substrates. The sulfide nanoarrays exhibit superior redox reactivity for electrochemical energy storage. The self-supported CoS nanowire arrays are tested as the pseudo-capacitor cathode, which demonstrate enhanced high-rate specific capacities and better cycle life as compared to the powder counterparts. The outstanding electrochemical properties of the sulfide nanoarrays are a consequence of the preservation of the nanoarray architecture and rigid connection with the current collector after the anion exchange reactions.

Hollow and hierarchical nanostructures have received wide attention in new‐generation, high‐performance, lithium ion battery (LIB) applications. Both TiO2 and Fe2O3 are under current investigation because of their high structural stability (TiO2) and high capacity (Fe2O3), and their low cost. Here, we demonstrate a simple strategy for the fabrication of hierarchical hollow TiO2@Fe2O3 nanostructures for the application as LIB anodes. Using atomic layer deposition (ALD) and sacrificial template‐assisted hydrolysis, the resulting nanostructure combines a large surface area with a hollow interior and robust structure. As a result, such rationally designed LIB anodes exhibit a high reversible capacity (initial value 840 mAh g−1), improved cycle stability (530 mAh g−1 after 200 cycles at the current density of 200 mA g−1), as well as outstanding rate capability. This ALD‐assisted fabrication strategy can be extended to other hierarchical hollow metal oxide nanostructures for favorable applications in electrochemical and optoelectronic devices.

Efficient hydrogen (H 2 ) production from renewable energy source is the most important requirement to produce clean fuels. Developing materials systems with high activity and good stability for solar energy conversion has become one of the most prominent and challenging research fields in the interdisciplinary scientific community. Recently, metal-free and graphite-like carbon nitiride (g-C 3 N 4 ) based on tri-s-triazine (heptazine) units has received much attention in the photocatalysis research due to its low cost, good stability and excellent optical and electronic properties.