Herein, we reported a special Fe-N-doped double-shelled hollow carbon microsphere (Fe-N-DSC) which was prepared by a facile, in situ polymerization followed by pyrolysis. With porous ferroferric oxide (FeO) hollow microspheres as the templates, where pyrrole monomers were dispersed around the outer surface and prefilled the interior space. By adding hydrochloric acid, Fe ions were released to initiate polymerization of pyrrole on both the outer and inner surfaces of FeO microspheres until they were completely dissolved, resulting in the Fe-containing polypyrrole double-shelled hollow carbon microspheres (Fe-PPY-DSC). The Fe-PPY-DSC was then pyrolyzed to generate the Fe-N-DSC. The FeO hollow microspheres played trifunctional roles, i.e., the template to prepare a double-shelled hollow spherical structure, the initiator (i.e., Fe ions) for the polymerization of pyrrole, and the Fe source for doping. The Fe-N-DSC exhibited a superior catalytic activity for oxygen reduction as comparable to commercial Pt/C catalysts in both alkaline and acidic media. The high catalytic performance was ascribed to the special porous double-shelled hollow spherical structure, which provided more active sites and was beneficial to a high-flux mass transportation.
Sun, wind and tides have huge potential in providing us electricity in an environmental-friendly way. However, its intermittency and non-dispatchability are major reasons preventing full-scale adoption of renewable energy generation. Energy storage will enable this adoption by enabling a constant and high-quality electricity supply from these systems. But which storage technology should be considered is one of important issues. Nowadays, great effort has been focused on various kinds of batteries to store energy, lithium-related batteries, sodium-related batteries, zinc-related batteries, aluminum-related batteries and so on. Some cathodes can be used for these batteries, such as sulfur, oxygen, layered compounds. In addition, the construction of these batteries can be changed into flexible, flow or solid-state types. There are many challenges in electrode materials, electrolytes and construction of these batteries and research related to the battery systems for energy storage is extremely active. With the myriad of technologies and their associated technological challenges, we were motivated to assemble this 2020 battery technology roadmap.
High-quality graphene scrolls (GSS) with a unique scrolled topography are designed using a microexplosion method. Their capacitance properties are investigated by cyclic voltammetry, galvanostatic charge-discharge and electrical impedance spectroscopy. Compared with the specific capacity of 110 F g(-1) for graphene sheets, a remarkable capacity of 162.2 F g(-1) is obtained at the current density of 1.0 A g(-1) in 6 M KOH aqueous solution owing to the unique scrolled structure of GSS. The capacity value is increased by about 50% only because of the topological change of graphene sheets. Meanwhile, GSS exhibit excellent long-term cycling stability along with 96.8% retained after 1000 cycles at 1.0 A g(-1). These encouraging results indicate that GSS based on the topological structure of graphene sheets are a kind of promising material for supercapacitors.
High‐quality graphene scrolls with several possible conformations are designed using a facile microexplosion method under an ultrasonic reaction between MnO2 and H2O2. The as‐obtained graphene scrolls exhibit a tubular structure. The methodology successfully realizes the transformation from a 2D material to a nearly 1D material.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.