We applied the core-shell concept to an urchin-inspired ZnO nanowire photoanode building block as a means to increase the electron transport and reduce recombination between nanowire and electrolyte. Dye-sensitized solar cells (DSSCs) were prepared, for the first time, from arrays of urchin-like ZnO nanowire building blocks covered with a thin layer of anatase TiO2 by atomic layer deposition (ALD). An increase in the cell open-circuit voltage (VOC) and

No abstract

In dye-sensitized solar cells, the photovoltaic efficiency of nanowires (NW) is still limited by their surface area and loss of light absorption compared with nanoparticle (NP) architectures. To overcome this limitation, the light harvesting efficiencies must be improved by increasing the total NW array surface area, without increasing too much the traveled distance of electrons.Here, we describe the design of a 3D architecture based on polystyrene spheres (PS) coated with ordered multilayers of urchin-like ZnO NWs (U-ZnO NWs) to be used as a high surface area nanostructure photoanode for dye-sensitized solar cells. Two to four layers of U-ZnO NWs were synthesized by using PS of 1 and 5 µm in diameter. The ordered layers of U-ZnO NWs were then coated with a thin layer of TiO2 by atomic layer deposition, and topped with a ~ 9-14 µm thick layer of anatase TiO2 NPs. We found that assembling organized layers of U-ZnO NWs significantly increased the surface area and provided better photon absorption. Moreover, coating the U-ZnO NWs with a thin TiO2 layer decreased the charge recombination and consequently enhanced the photovoltaic efficiency.

Due to their innocuity, Au nanowires present an interesting field of applications in biology and, particularly, in cancer therapy. Since their morphology and distribution can greatly affect their performances, being able to control their mode of growth is important. Various elaboration techniques including "top-down" and "bottom-up" approaches have been developed. In this work, we propose an efficient maskless method to grow Au nanowires with the help of hydrogen plasma treatment of Au thin films. We have been able to grow Au nanowires by taking advantage of spinodal dewetting of an Au thin film and the supply of silicon radicals resulting from hydrogen plasma etching of amorphous silicon coating the walls of the reactor. A variety of techniques have been applied to study the microstructure and the optical properties of Au nanowires. A strong photothermal effect of Au nanowires has been demonstrated with the help of visible laser light. In order to study the nanowire growth, the transport of Au atoms is discussed and a growth mechanism is proposed.