Graphene-like two-dimensional (2D) nanostructures have attracted significant attention because of their unique quantum confinement effect at the 2D limit. Multilayer nanosheets of GaS-GaSe alloy are found to have a band gap (Eg) of 2.0-2.5 eV that linearly tunes the emission in red-to-green. However, the epitaxial growth of monolayers produces a drastic increase in this Eg to 3.3-3.4 eV, which blue-shifts the emission to the UV region. First-principles calculations predict that the Eg of these GaS and GaSe monolayers should be 3.325 and 3.001 eV, respectively. As the number of layers is increased to three, both the direct/indirect Eg decrease significantly; the indirect Eg approaches that of the multilayers. Oxygen adsorption can cause the direct/indirect Eg of GaS to converge, resulting in monolayers with a strong emission. This wide Eg tuning over the visible-to-UV range could provide an insight for the realization of full-colored flexible and transparent light emitters and displays.

Sn-based nanostructures have emerged as promising alternative materials for commercial lithium-graphite anodes in lithium ion batteries (LIBs). However, there is limited information on their phase evolution during the discharge/charge cycles. In the present work, we comparatively investigated how the phases of Sn, tin sulfide (SnS), and tin oxide (SnO2) nanocrystals (NCs) changed during repeated lithiation/delithiation processes. All NCs were synthesized by a convenient gas-phase photolysis of tetramethyl tin. They showed excellent cycling performance with reversible capacities of 700 mAh/g for Sn, 880 mAh/g for SnS, and 540 mAh/g for SnO2 after 70 cycles. Tetragonal-phase Sn (β-Sn) was produced upon lithiation of SnS and SnO2 NCs. Remarkably, a cubic phase of diamond-type Sn (α-Sn) coexisting with β-Sn was produced by lithiation for all NCs. As the cycle number increased, α-Sn became the dominant phase. First-principles calculations of the Li intercalation energy of α-Sn (Sn8) and β-Sn (Sn4) indicate that Sn4Li(x) (x ≤ 3) is thermodynamically more stable than Sn8Li(x) (x ≤ 6) when both have the same composition. α-Sn maintains its crystalline form, while β-Sn becomes amorphous upon lithiation. Based on these results, we suggest that once α-Sn is produced, it can retain its crystallinity over the repeated cycles, contributing to the excellent cycling performance.

Various germanium-based nanostructures have recently demonstrated outstanding lithium ion storage ability and are being considered as the most promising candidates to substitute current carbonaceous anodes of lithium ion batteries. However, there is limited understanding of their structure and phase evolution during discharge/charge cycles. Furthermore, the theoretical model of lithium insertion still remains a challenging issue. Herein, we performed comparative studies on the cycle-dependent lithiation/delithiation processes of germanium (Ge), germanium sulfide (GeS), and germanium oxide (GeO2) nanocrystals (NCs). We synthesized the NCs using a convenient gas phase laser photolysis reaction and attained an excellent reversible capacity: 1100-1220 mAh/g after 100 cycles. Remarkably, metastable tetragonal (ST12) phase Ge NCs were constantly produced upon lithiation and became the dominant phase after a few cycles, completely replacing the original phase. The crystalline ST12 phase persisted through 100 cycles. First-principles calculations on polymorphic lithium-intercalated structures proposed that the ST12 phase Ge12Lix structures at x ≥ 4 become more thermodynamically stable than the cubic phase Ge8Lix structures with the same stoichiometry. The production and persistence of the ST12 phase can be attributed to a stronger binding interaction of the lithium atoms compared to the cubic phase, which enhanced the cycling performance.

Few layered GeAs nanosheets exhibit a band gap of 2.1 eV, corresponding to that of monolayer predicted from first-principles calculations.

Germanium-tin (Ge(1-x)Sn(x)) alloy nanocrystals were synthesized using a gas-phase laser photolysis reaction of tetramethyl germanium and tetramethyl tin. A composition tuning was achieved using the partial pressure of precursors in a closed reactor. For x < 0.1, cubic phase alloy nanocrystals were exclusively produced without separation of the tetragonal phase Sn metal. In the range of x = 0.1-0.4, unique Ge(1-x)Sn(x)-Sn alloy-metal hetero-junction nanocrystals were synthesized, where the Sn metal domain becomes dominant with x. Thin graphitic carbon layers usually sheathed the nanocrystals. We investigated the composition-dependent electrochemical properties of these nanocrystals as anode materials of lithium ion batteries. Incorporation of Sn (x = 0.05) significantly increased the capacities (1010 mA h g(-1) after 50 cycles) and rate capabilities, which promises excellent electrode materials for the development of high-performance lithium batteries.