This study aims to investigate the influence of fishnet mesh size on a floating platform. A self-developed, time-domain numerical model was used for the evaluation. This model is based on potential flow theory, uses the boundary element method (BEM) to solve nonlinear wave-body interactions, and applies the Morison equation to calculate the hydrodynamic forces exerted on fishnets. The mooring system is treated as a linear and symmetric spring. The results near the resonant frequency of the platform indicate that the smaller the fishnet mesh size, the lower the heave, pitch, and sea-side tension response amplitude operators (RAOs), but the higher the reflection coefficient. The results in the lower frequency region reveal that the smaller the fishnet mesh size, the lower the surge and heave RAOs, but the higher the pitch and tension RAOs. Meanwhile, the time-domain results at the resonant frequency of heave motion are shown to indicate the influences of a platform with various fishnets mesh sizes on the rigid body motion, mooring line tension, and transmitted wave heights. In addition, a comparison of nonlinear effects indicates that, after reducing the fishnet mesh size, the second-order RAOs of heave, pitch, and sea-side tension decrease, but the changes are minor against the first-order results.
Up to date, the mooring system failure of aquaculture net cage remains a continuing problem, especially the domino effect, which often leads to huge economic losses. Thus, this study aims to investigate the domino effect of a mooring system of a net cage under waves and currents. In this study, a time-domain numerical model based on the Morison equation and the lumped mass method is applied. A full-scale net cage system widely used in a local sea area is adopted. A 50 years return period waves with a strong following current is considered to be the design condition. It can be expected that the tension on the remaining upstream anchor increases dramatically when an upstream anchor is lost. Then, the domino effect occurs if the maximum tension on the remaining anchor exceeds its design condition. Therefore, in this simulation, the initial failure is considered to be a man-made event at a preset time, but the rest failures are resulted from exceeding the breaking strength of a rope. Both the current-only condition and the wave-current condition have been examined. The results including mooring line tension, volume reduction coefficient and rigid body motion are discussed. In addition, the results show that the failure sequence of anchor is different between the current-only condition and the wave-current condition.
This study aims to investigate the performance changes resulted from a mooring line failure of a marine fish cage exposed to irregular waves and current. A numerical model based on the lumped mass method and Morison equation was extended to simulate the mooring line failure scenario. In this study, the failed resulting changes were compared with its normal counterpart in both the time domain and the frequency domain. After one upstream anchor loss, the maximum tension on the remaining anchor has increased significantly, as well as the drift distance of the rearing part (net chamber, floating collar, and tube-sinker) of the fish cage. The resulting changes can also be seen in both the wave-frequency and the low-frequency region in the spectra, including mooring tensions and body motions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.