This paper reviews the particle emissions formed during the combustion process in spark ignition and diesel engine. Proposed legislation in Europe and California will impose a particle number requirement for GDI (gasoline direct injection) vehicles and will introduce the Euro 6 and LEV-III emission standards. More careful optimization for reducing particulate emission on engine hardware, fuel system, and control strategy to reduce particulate emissions will be required during cold start and warm-up phases. Because The diesel combustion inherently produces significant amounts of PM as a result of incomplete combustion around individual fuel droplets in the combustion zone, much attention has been paid to reducing particle emissions through electronic engine control, high pressure injection systems, combustion chamber design, and exhaust after-treatment technologies. In this paper, recent research and development trends to reduce the particle emissions from internal combustion engines are summarized, with a focus on PMP activity in EU, CARB and SAE papers and including both state-of-the-art light-duty vehicles and heavy-duty engines.

No abstract

No abstract

No abstract

: Lean NOx Trap (LNT) catalysts are capable of reducing exhaust NOx emissions from diesel engines. LNT stores NOx in lean condition and exhausts N2 by reducing NOx in rich condition. NOx reduction characteristic of LNT catalysts using throttle position sensor and fuel injection timing control for light-duty diesel engine was investigated. In contrast to SCR system, LNT catalyst uses diesel fuel in resuctant. Also if the concentration of reductant is exceeded, excessive amount of reductant will slip throughout LNT and cause another emission problem. Thus LNT regeneration with precise engine control established that can make higher NOx conversion efficiency and lower fuel penalty, prevent another emission problem. NOx and reductant concentration were measured by the NOx sensor and Mexa7100D equipped inlet and outlet of catalyst. As a result of engine test, regeneration strategy has reached high of 77.8% NOx conversion efficiency according to engine operation condition. Moreover, we have proved that it is possible to use regeneration strategy of LNT within 5% fuel penalty.