No abstract

This computerized task is a good proxy measure of the level of everyday life and cognitive functioning of persons diagnosed with alcohol dependency.

The MetOp-SG 3MI mission is part of the EUMETSAT Polar System Second Generation (EPS-SG), an Earth observation Program for Operational Meteorology from Low Earth Orbit. It consists of two multi-spectral cameras, one operating in VNIR and one in SWIR. With 13 spectral channels between 410nm and 2130nm, including polarized channels, the instrument covers a semi-field of view of 57°. Due to tight stray-light specifications, on-ground calibration and post-processing correction are required. This paper covers the stray-light correction and calibration methods. The correction is indeed based on the on-ground measurement of Spatial Point Source Transmittance (SPST) maps. Due to the limited amount of maps which can actually be calibrated within a reasonable amount of time, an interpolation method was developed to deduce the stray-light behavior in the whole field of view of the instrument. Furthermore, dynamic range decomposition was required during the acquisition of the maps to get a high signal to noise ratio. Ray-tracing data from the 3MI optical model were used to evaluate the performance of the correction algorithm, including the contribution of SPST maps interpolation and acquisition errors.

A B S T R A C TIn this article, we propose a new solar concentrator based on spectral splitting of sunlight. Spectral splitting has the objective to collect different spectra onto spectrally adapted solar cells for a more efficient use of the Sun's spectrum. Its combination with solar concentration makes an alternative to classical technologies. The proposed concentrator is composed of a diffractive/refractive optical element that spectrally splits and focuses the light onto a waveguide. The light is then conducted by total internal reflection towards the two specific solar cells. The optical concept and optimization of each element is presented in this paper. An adaptation for dye sensitized solar cells is performed. A geometrical factor around 5× is reached. Finally, theoretical optical efficiency, the manufacturing process and experimental testing with a collimated Sun simulator are presented.

No abstract

No abstract

No abstract

No abstract