We present a statistical analysis of the first 300 stars observed by the Gemini Planet Imager Exoplanet Survey. This subsample includes six detected planets and three brown dwarfs; from these detections and our contrast curves we infer the underlying distributions of substellar companions with respect to their mass, semimajor axis, and host

Properly apodized pupils can deliver point spread functions (PSFs) free of Airy rings, and are suitable for high dynamical range imaging of extrasolar terrestrial planets (ETPs). To reach this goal, classical pupil apodization (CPA) unfortunately requires most of the light gathered by the telescope to be absorbed, resulting in poor throughput and low angular resolution. Phaseinduced amplitude apodization (PIAA) of the telescope pupil (Guyon 2003) combines the advantages of classical pupil apodization (particularly low sensitivity to low order aberrations) with full throughput, no loss of angular resolution and little chromaticity, which makes it, theoretically, an extremely attractive coronagraph for direct imaging of ETPs. The two most challenging aspects of this technique are (1) the difficulty to polish the required optics shapes and (2) diffraction propagation effects which, because of their chromaticity, can decrease the spectral bandwidth of the coronagraph. We show that a properly designed hybrid system combining classical apodization with the PIAA technique can solve both problems simultaneously. For such a system, the optics shapes can be well within today's optics manufacturing capabilities, and the 10 −10 PSF contrast at ≈ 1.5λ/D required for efficient imaging of ETPs can be maintained over the whole visible spectrum. This updated design of the PIAA coronagraph maintains the high performance of the earlier design, since only a small part of the light is lost in the classical apodizer(s).

The Phase-Induced Amplitude Apodization (PIAA) coronagraph is a high performance coronagraph concept able to work at small angular separation with little loss in throughput. We present results obtained with a laboratory PIAA system including active wavefront control. The system has a 94.3% throughput (excluding coating losses) and operates in air with monochromatic light.Our testbed achieved a 2.27 10 −7 raw contrast between 1.65 λ/D (inner working angle of the coronagraph configuration tested) and 4.4 λ/D (outer working angle). Through careful calibration, we were able to separate this residual light into a dynamic coherent component (turbulence, vibrations) at 4.5 10 −8 contrast and a static incoherent component (ghosts and/or polarization missmatch) at 1.6 10 −7 contrast. Pointing errors are controlled at the 10 −3 λ/D level using a dedicated low order wavefront sensor.While not sufficient for direct imaging of Earth-like planets from space, the 2.27 10 −7 raw contrast achieved already exceeds requirements for a ground-based Extreme Adaptive Optics system aimed at direct detection of more massive exoplanets. We show that over a 4hr long period, averaged wavefront errors have been controlled to the 3.5 10 −9 contrast level. This result is particularly encouraging for ground based Extreme-AO systems relying on long term stability and absence of static wavefront errors to recover planets much fainter than the fast boiling speckle halo.

Curvature wavefront sensors measure wavefront phase aberration by acquiring two intensity images on either side of the pupil plane. Low-order adaptive optics (AO) systems using curvature wavefront sensing (CWFS) have proved to be highly efficient for astronomical applications: they are more sensitive, use fewer detector elements, and achieve, for the same number of actuators, higher Strehl ratios than AO systems using more traditional Shack-Hartmann wavefront sensors. In higher-order systems, however, curvature wavefront sensors lose sensitivity to low spatial frequencies wavefront aberrations. This effect, often described as "noise propagation," limits the usefulness of curvature wavefront sensing for high-order AO systems and/or large telescopes. In this paper, we first explain how this noise propagation effect occurs and then show that this limitation can be overcome by acquiring four defocused images of the pupil instead of two. This solution can be implemented without significant technology development and can run with a simple linear wavefront reconstruction algorithm at > kHz speed. We have successfully demonstrated in the laboratory that the four conjugation planes can be sequentially obtained at > kHz speed using a speaker-vibrating membrane assembly commonly used in current curvature AO systems. Closed loop simulations show that implementing this scheme is equivalent to making the guide star 1 to 1.5 magnitude brighter for the configuration tested (188 actuator elements on 8-m telescope). Higher sensitivity gains are expected on curvature systems with higher number of actuators.

No abstract

The design of future single-altitude conjugated adaptive optics (AO) systems may include at least two deformable mirrors (DMs) instead of one as in the current AO system. Each DM will have to correct for a specific spatial frequency range. A method is presented to derive a DM modal basis based on the influence functions of the DM. The modal bases are derived such that they are orthogonal to a given set of modes that restrict the DM correction to a spatial frequency domain. The modal bases have been tested on the woofer-tweeter test bench at the University of Victoria. It has been shown that the rms amplitude of the woofer DM and tweeter DM stroke can be reduced by factors of 3 and 9, respectively, when making the transition from a zonal-driven closed loop to a modal-driven closed loop with the same performance in both cases.

RAVEN will be a Multi-Object Adaptive Optics (MOAO) technology and science demonstrator on the Subaru telescope. The baseline design calls for three natural guide star (NGS) wavefront sensors (WFS) and two science pickoff arms that will patrol a ∼2′ diameter field of regard (FOR). Sky coverage is an important consideration, because RAVEN is both a technical and science demonstrator. Early-stage simulation of RAVEN's performance is critical in establishing that the key science requirement can be met. That is, 30% of the energy of an unresolved pointspread function (PSF) be ensquared within a 140 mas slit using existing WFS camera and deformable mirror (DM) technology. The system was simulated with two independent modeling tools, MAOS and OOMAO, which were in excellent agreement. It was established that RAVEN will be an order 10 × 10 adaptive optics (AO) system by examining the tradeoffs between performance, sky coverage, and WFS field of view. The 30% ensquared-energy (EE) requirement will be met with three NGSs and will exceed 40% if the Subaru Laser Guide Star (LGS) is used onaxis (assuming median image quality). This is also true for NGSs as faint as m R ¼ 14:5.

ABSTRACT. Phase-induced amplitude apodization (PIAA) is a well-demonstrated high-contrast technique that uses an intermediate remapping of the pupil for high-contrast coronagraphy (apodization), before restoring it to recover classical imaging capabilities. This paper presents the first demonstration of complete speckle control loop with one such PIAA coronagraph. We show the presence of a complete set of remapping optics (the so-called PIAA and matching inverse PIAA) is transparent to the wavefront control algorithm. Simple focal-plane-based wavefront control algorithms can thus be employed, without the need to model remapping effects. Using the Subaru Coronagraphic Extreme AO (SCExAO) instrument built for the Subaru Telescope, we show, using a calibration source, that a complete PIAA coronagraph is compatible with a simple implementation of a speckle nulling technique, and demonstrate the benefit of the PIAA for high-contrast imaging at small angular separation.