Italy is among the top biowaste-generating countries in Europe, and has a well-structured waste management framework with quite a number of centralized composting facilities. In recent years, there has also been huge interest from local communities in decentralized composting. Although decentralized community composting is common in some countries, there is still a lack of information on the operative environment together with its potential logistical, environmental, economic, and social impacts. Considering the national Italian legislation on community composting as well as successfully implemented projects at EU level, Italy can set a model especially for Mediterranean countries that intend to build decentralized composting programs. Therefore, in the context of this review paper, a brief overview of the composting process was presented together with main applications in centralized and especially in decentralized composting, while the main focus was kept on the operative and legislative information gathered from Italian community composting. There is a huge difference in the number of composting plants between the regions, and the lack of centralized facilities in the central and southern regions can be supported by decentralized solutions. Decentralizing waste treatment facilities and thus creating local solutions to urban waste management strategies will help to achieve the resource recovery and valorization targets in line with the circular economy.

The first phase of this study aimed to evaluate the environmental impact of combined sewer overflow (CSO) events originated from 35 spillways on the Rio Vallescura catchment (Central Italy) and to understand their contribution to the deterioration of the coastal bathing water quality. A specific analytical campaign was carried out in the sewer system and a dynamic rainfall-runoff simulation model was developed and integrated with a water quality model and further validated. The simulations led to identify the most critical spills in terms of flow rate and selected pollutant loads (i.e. suspended solids, biochemical oxygen demand, chemical oxygen demand, total Kjeldahl nitrogen, Escherichia coli). Specifically, the E. coli release in the water body due to CSO events represented almost 100% of the different pollutant sources considered. In the second phase, the applicability of various disinfection methods was investigated on the CSOs introduced into the catchment. On site physical (UV) and lab-scale chemical (peracetic acid (PAA), performic acid (PFA), ozone) disinfectant agents were tested on microbial indicators including E. coli and intestinal enterococci. PFA and ozone were more effective on the removal of both bacteria (above 3.5 log units) even at low concentration and with short contact time; whereas, PAA showed a moderate removal efficiency (around 2.5 log units) only for E. coli. The highest removal efficiency was achieved in the on-site UV unit and none of the indicator bacteria was detected in the final effluent after the sand filtration and UV treatment. Finally, potential scenarios were developed in comparison to the baseline scenario for the management and treatment of CSOs where a mitigation of E. coli loads from 28% to 73% was achieved on the receiving water body, and a comparative cost assessment of the disinfection methods was provided for in situ treatment of the most critical spillway.

Anaerobic processes are proven to have much more environmental and economic benefits than conventional aerobic treatment systems, offering sustainable energy and valuable biochemicals. In recent years, bio-based volatile fatty acid (VFA) production has come into prominence as more value is derived before ending up with other final products. This paper presents a critical review of the research studies on bio-based VFA production from different waste streams (i.e., industrial sludge/waste, organic fraction of municipal solid waste/food waste, municipal wastewater/sludge, combined streams) through anaerobic fermentation. Fundamentals and decisive process parameters (i.e., pH, temperature, retention time, organic loading rate) are reviewed, and their correlations with VFA yields are critically discussed based on 178 cases (156 lab- and 22 pilot-scale). The picture we provided clearly demonstrates that process parameters should be clearly defined and optimized according to the type of waste streams which may have a significant impact on downstream processes in most cases.

No abstract

No abstract