A procedure for the fabrication of monolithic silica aerogels in eight hours or less via a rapid supercritical extraction process is described. The procedure requires 15-20 min of preparation time, during which a liquid precursor mixture is prepared and poured into wells of a metal mold that is placed between the platens of a hydraulic hot press, followed by several hours of processing within the hot press. The precursor solution consists of a 1.0:12.0:3.6:3.5 x 10 -3 molar ratio of tetramethylorthosilicate (TMOS):methanol:water:ammonia. In each well of the mold, a porous silica sol-gel matrix forms. As the temperature of the mold and its contents is increased, the pressure within the mold rises. After the temperature/ pressure conditions surpass the supercritical point for the solvent within the pores of the matrix (in this case, a methanol/water mixture), the supercritical fluid is released, and monolithic aerogel remains within the wells of the mold. With the mold used in this procedure, cylindrical monoliths of 2.2 cm diameter and 1.9 cm height are produced. Aerogels formed by this rapid method have comparable properties (low bulk and skeletal density, high surface area, mesoporous morphology) to those prepared by other methods that involve either additional reaction steps or solvent extractions (lengthier processes that generate more chemical waste).The rapid supercritical extraction method can also be applied to the fabrication of aerogels based on other precursor recipes. Video LinkThe video component of this article can be found at

Trehalose is a disaccharide produced by many organisms to better enable them to survive environmental stresses, including heat, cold, desiccation, and reactive oxygen species. Mammalian cells do not naturally biosynthesize trehalose; however, when introduced into mammalian cells, trehalose provides protection from damage associated with freezing and drying. One of the major difficulties in using trehalose as a cellular protectant for mammalian cells is the delivery of this disaccharide into the intracellular environment; mammalian cell membranes are impermeable to the hydrophilic sugar trehalose. A panel of cell-permeable trehalose analogues, in which the hydrophilic hydroxyl groups of trehalose are masked as esters, have been synthesized and the ability of these analogues to load trehalose into mammalian cells has been evaluated. Two of these analogues deliver millimolar concentrations of free trehalose into a variety of mammalian cells. Critically, Jurkat cells incubated with these analogues show improved survival after heat shock, relative to untreated Jurkat cells. The method reported herein thus paves the way for the use of esterified analogues of trehalose as a facile means to deliver high concentrations of trehalose into mammalian cells for use as a cellular protectant.

No abstract

No abstract