No abstract

No abstract

Multi-walled and single-walled carbon nanotubes were used as nanoadsorbents for the successful removal of Reactive Blue 4 textile dye from aqueous solutions. The adsorbents were characterised by infrared and Raman spectroscopy, N(2) adsorption/desorption isotherms and scanning and transmission electron microscopy. The effects of pH, shaking time and temperature on adsorption capacity were studied. In the acidic pH region (pH 2.0), the adsorption of the dye was favourable using both adsorbents. The contact time to obtain equilibrium isotherms at 298-323 K was fixed at 4 hours for both adsorbents. The general order kinetic model provided the best fit to the experimental data compared with pseudo-first order and pseudo-second order kinetic adsorption models. For Reactive Blue 4 dye, the equilibrium data (298 to 323 K) were best fitted to the Liu isotherm model. The maximum sorption capacity for adsorption of the dye occurred at 323 K, attaining values of 502.5 and 567.7 mg g(-1) for MWCNT and SWCNT, respectively. Simulated dyehouse effluents were used to check the applicability of the proposed nanoadsorbents for effluent treatment (removal of 99.89% and 99.98%, for MWCNT and SWCNT, respectively). The interaction of Reactive Blue 4 textile dye with single-walled carbon nanotubes (SWCNTs) was investigated using first principles calculations based on density functional theory. Results from ab initio calculations indicated that Reactive Blue 4 textile dye could be adsorbed on SWCNT through an electrostatic interaction; these results are in agreement with the experimental predictions.

No abstract

The incorporation of nanostructured hydroxyapatite increases the adhesive properties and may be a promising filler for adhesive resin.

No abstract

Calcium phosphate cements are biomaterials made from a mixture of calcium phosphate powder in aqueous solutions that forms a paste that reacts at the body temperature and hardens as a result of precipitation reactions. These cements are commonly used in dentistry and orthopedic bone filling surgeries, which require extremely invasive procedures. The challenge consists in formulating an injectable paste by additives incorporation. In this work, three different additives (carboxymethylcellulose, agar polymer and sodium alginate) were incorporated to tricalcium phosphate, in concentrations of 0.4, 0.8, 1.6, 3.2 and 6.4 wt.%. Injectability was evaluated through a new method developed for this purpose. Results showed that it was possible to obtain injectable compositions of alpha-tricalcium phosphate cement. It was verified that the injectability depends on the rheological behavior of the pastes and injection time. In this study, pastes with viscosity suitable for good homogenization and injection were obtained.

Niobium pentoxide could be used to produce adhesive resins with enhanced properties.