Forma sugerida de citación: Carrillo, M.; Claudio, C.; Mayorga, A. (2018). «Caracterización de un generador de flujo axial para aplicaciones en energía eólica». Ingenius. N.• 19, (enero-junio Resumen AbstractEl aprovechamiento de los recursos energéticos no convencionales en los últimos años se ha desarrollado principalmente con la intención de disminuir el uso de combustibles. A mediana y pequeña escala la tendencia mundial, cuando se habla de generación eléctrica utilizando la energía eólica, es el uso de generadores de imanes permanentes. Los generadores de flujo axial son lo que se encuentran con mayor frecuencia a disposición. La principal característica de estos generadores es su capacidad de entregar energía eléctrica a bajas revoluciones, con una eficiencia aceptable. En este proyecto de investigación se caracterizaron dos tipos de generadores de flujo axial; uno con bobinas en serie y otro con bobinas en paralelo, con la intención de valorar el rendimiento de cada uno. El diseño parte de la determinación del flujo magnético, número de revoluciones, número de polos, número de bobinas, voltaje de salida y pérdidas eléctricas, para luego realizar el contraste a través de la toma de datos de amperaje y voltaje con respecto al cálculo teórico; la finalidad es establecer la eficiencia que presentan cada una de las configuraciones. Se estableció que el generador en serie posee características que lo convierten en una configuración que tiene una eficiencia mayor que la del generador en paralelo.The use of unconventional energy resources in recent years has developed mainly with the intention of reducing the use of fossil fuels to obtain electricity. When talking about electricity generation at medium and small scale, the global trend while taking advantage of wind energy, is the use of permanent magnet generators. Axial flow generators are the most often available: the main feature of these generators is their ability to deliver electrical power at low revolutions, with an acceptable efficiency. In this research project two types of axial flow generators were characterized; one with coils in series and another with coils in parallel, with the intention of evaluating the performance of each one. The design starts from the determination of the magnetic flux, number of revolutions, number of poles, number of coils, output voltage and electrical losses, to then carry out the contrast through the data acquisition of amperage and voltage with respect to the theoretical calculation; the purpose is to establish the efficiency of each of the configurations. It was established that the series generator has characteristics that make it a configuration that has an efficiency greater than that of the generator in parallel.
Introducción: La presente investigación está enfocada en satisfacer necesidades energéticas básicas de una pequeña vivienda que no disponía de energía eléctrica ubicada en el sector de Río Blanco comunidad de Yatzaputzán provincia de Tungurahua. Inicialmente y debido a condiciones económicas, geográficas y ambientales al prevalecer un clima frío de tipo páramo se diseñó e instaló un sistema híbrido eólico-fotovoltaico para la carga de baterías que permitió dotar de iluminación y utilización de electrodomésticos; así como también el otorgar agua caliente mediante un sistema de precalentamiento que consiste de tubos al vacío y paneles térmicos de placa plana Objetivo: Generar energía eléctrica que permita la carga adecuada de baterías aplicando un sistema de control, con la finalidad de optimizar periodos de funcionamiento de un convertidor que utiliza resistencias eléctricas y las convierte en energía térmica. Metodología: Las pruebas se realizaron mediante la toma de datos in situ, considerando los parámetros de radiación solar, velocidad del viento y temperatura ambiente promedio. Resultados: Del análisis realizado se obtuvo que el promedio mensual de la velocidad del viento es de 1.5 a con una altura de referencia de 2.50 m y la radiación mensual promedio toma valores comprendidos entre 140 a 150 . Para garantizar el correcto funcionamiento del convertidor se realizaron proyecciones que permiten determinar el incremento de temperatura del agua demostrando que la realización del proyecto tiene una eficiencia alta. Conclusiones: Se estableció que al realizar un proceso de precalentamiento y un suministro constante de energía eléctrica provenientes de las baterías y generados por medios no convencionales con condiciones de temperatura ambiente y voltaje inicial en la comunidad de Río Blanco producen en promedio un incremento de temperatura en el funcionamiento del convertidor en el rango de a 4 0C
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.