Magnetically imploded cylindrical metal shells ( -pinch liners) are attractive drivers for experiments exploring hydrodynamics and properties of materials at extreme conditions. As in all -pinches, the outer surface of a liner is unstable to magneto Rayleigh-Taylor (RT) modes during acceleration, and large-scale distortion arising from RT modes could make such liners unuseable. On the other hand, material strength in the liner should, from first principles, reduce the growth rate of RT modes, and material strength can render some combinations of wavelength and amplitude analytically stable. A series of experiments has been conducted in which high-conductivity, soft, cylindrical aluminum liners were accelerated with 6-MA, 7-s rise-time driving currents. Small perturbations were machined into the outer surface of the liner and perturbation growth monitored. Two-dimensional magneto-hydrodynamic (2-D-MHD) calculations of the growth of the initial perturbations were in good agreement with experimentally observed perturbation growth through the entire course of the implosions. In general, for high-conductivity and soft materials, theory and simulation adequately predicted the behavior of magneto-RT modes in liners where elastic-plastic behavior applies. This is the first direct verification of the growth of magneto-RT in solids with strength known to the authors.

Two linear induction accelerators (LIAs) have been in operation for a number of years at the Los Alamos Dual Axis Radiographic Hydrodynamic Test (DARHT) facility. A new multipulse LIA is being developed. We have computationally investigated the beam breakup (BBU) instability in this advanced LIA. In particular, we have explored the consequences of the choice of beam injector energy and the grouping of LIA cells. We find that within the limited range of options presently under consideration for the LIA architecture, there is little adverse effect on the BBU growth. The computational tool that we used for this investigation was the beam dynamics code linear accelerator model for DARHT (LAMDA). To confirm that LAMDA was appropriate for this task, we first validated it through comparisons with the experimental BBU data acquired on the DARHT accelerators. Index Terms-Electron beam instabilities, linear induction accelerators (LIAs).

We have developed a quasianamorphic optical tomography system coupled to a streak camera to provide continuous recording of the electron beam profile of an intense, long-pulse induction accelerator. A tomographic reconstruction method based on a maximum-entropy algorithm is used to reconstruct the images. The system has simplified the calculation of beam moments, eliminated ambiguity due to beam motion, and contributed to accelerator tuning.

An electromagnetics problem that arises in long-pulse beam experiments is the decay of image currents (and their fields) resulting from a beam that is offset from the geometric axis of the beam tube. A related problem, which arises in calibration of beam diagnostics, is that of simulating the beam using a current-carrying conductor. These problems are solved analytically in the limit that the tube walls are thin compared with the magnetic-field penetration depth. It is shown that the transient decay time of the fields for these two cases is different.

is operated by the UNversity of California for the United States Dqartm@ of Energ under emtraet W-74CJ5-ENG-36.