Defects such as cracks, pores, and particle-matrix interface debonding affect the sensitivity of energetic materials by reducing the time-to-ignition and the threshold pressure to initiate an explosion. Frictional sliding of preexisting cracks is considered to be one of the most important causes of localized heating. Therefore, understanding the dynamic fracture of crystalline energetic materials is of extreme importance to assess the reliability and safety of polymer-bonded explosives. Phase field damage model simulations, based on the regularization of the crack surface as a diffuse delta function, are used to describe crack propagation in cyclotetramethylene-tetranitramine crystals embedded in a Sylgard matrix. A thermal transport model that includes heat generation by friction at crack interfaces is coupled to the solution of crack propagation. 2D and 3D dynamic compression simulations are performed with different boundary velocities and initial distributions of cracks and interface defects to understand their effect on crack propagation and heat generation. It is found that, at an impact velocity of 400 m/s, localized damage at the particle-binder interface is of key importance and that the sample reaches temperatures high enough to create a hot-spot that will lead to ignition. At an impact velocity of 10 m/s, preexisting cracks advanced inside the particle, but the increase of temperature will not cause ignition.
The collapse of pores plays an essential role in the shock initiation of high energy (HE) materials. When these materials are subjected to shock loading, energy is localized in hot-spots due to various mechanisms, including void collapse. Depending on the void size and shock strength, the resulting hot-spots may quench or evolve into a self-sustained deflagration wave that consequently can cause detonation. We compare finite element (FE) and non-reactive molecular dynamic (MD) simulations to study the formation of hot-spots during the collapse of an 80 nm size void in a β-tetramethylene tetranitramine energetic crystal. The crystal is shocked normal to the crystallographic plane (010), applying boundary velocities of 0.5 km/s, 1.0 km/s, and 2.0 km/s. The FE simulations capture the transition from viscoelastic collapse for relatively weak shocks to a hydrodynamic regime, the overall temperature distributions, especially at scales relevant for the initiation of HE materials, and the rate of pore collapse. A detailed comparison of velocity and temperature fields shows that the MD simulations exhibit more localization of plastic deformation, which results in higher temperature spikes but localized to small volumes. The void collapse rate and temperature field are strongly dependent on the plasticity model in the FE results, and we quantify these effects.
Heat generation in the vicinity of a void during shock compression plays a key role in the initiation of energetic materials. The shock response of a single β ‐HMX crystal with a single void is studied with simulations that include plasticity and heat transport. The numerical results are validated with an experiment in which a 500 μ m void is machined in an HMX single crystal and impacted. Experiments and simulations of the dynamical evolution of the morphology of the void during the collapse and the rate of the area are in very good agreement for weak shocks.
Mechanical insult may be able to produce chemical transformations in solids when the energy is released in highly localized regions. This phenomenon is responsible for the nucleation of hot-spots that are responsible for ignition of energetic materials. The concentration of energy at microstructural defects leads to the probabilistic nature of ignition. The effect of the microstructure of the energetic particles, specifically the influence of the initial crack distribution on the sensitivity to ignition, is studied for a particle embedded in a polymeric matrix at impact velocities 100 m/s and 400 m/s with finite element simulations that couple fracture dynamics and heat transport. A phase field damage model that includes heat sources due to frictional heating at the crack surfaces and heat dissipation during crack propagation is developed and verified. These heat sources are compared and, in the range of impact velocities studied, heat generation due to friction is more important than dissipation due to crack propagation. Hot-spots nucleated at 100 m/s do not reach the critical temperature while conditions consistent with the Lee-Tarver criterion for ignition are observed at 400 m/s impact velocity. The variability observed due to the stochasticity of the initial crack distribution is studied and it increases with a higher impact velocity. In particular, regions of high temperature develop close to cracks intersecting the particle polymer interface. Therefore, controlling the surface quality of the energetic particles may lead to a reduction on the sensitivity uncertainty in polymer-bonded explosives.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.