ResumoO aço inoxidável ferrítico tipo 430 estabilizado com Nb, com e sem recozimento após laminação a quente, foi laminado a frio e submetido a recozimentos isotérmicos em temperaturas de 650ºC, 700ºC, 750ºC e 800°C por 900 s para análise da evolução da textura de recristalização e do tamanho do grão via técnica de EBSD. Ocorreu o refino do grão após recristalização, resultando em um tamanho final de 12,2 µm. Observou-se um aumento da intensidade das componentes (111)[12 1] e (111)[01 1] da fibra γ e diminuição na intensidade da fibra α de deformação. A componente cubo girado, característica do aço laminado a quente, desaparece com a recristalização. As propriedades mecânicas desse aço, principalmente o comportamento em estampagem profunda, são diretamente afetadas por sua textura de recristalização. Palavras-chave: Aços inoxidáveis ferríticos; Textura cristalográfica; EBSD. ANALYSIS OF THE TEXTURE EVOLUTION IN A FERRITIC STAINLESS STEEL TYPE 430 STABILIZED WITH NIOBIUM AFTER ROLLING AND ANNEALING AbstractFerritic stainless steel type 430 stabilized with Nb, with and without annealing after hot rolled, was cold rolled and subjected to isothermal annealing at 650°C, 700°C, 750°C and 800°C for 900 s to analyze the evolution of the recrystallization texture and grain size through EBSD technique. There was an increase in intensity of the component (111)[12 1] and (111)[01 1] of γ fiber and the decrease in intensity of the deformation fiber α. The rotated cube component, feature of the hot rolled steel, decreased with annealing time. The results showed that occurred the grain refining after recrystallization, resulting in a final average size of 12,2 µm. The mechanical properties of these steels, especially the behavior in deep drawing, are directly affected by their recrystallization texture.
ResumoO aço inoxidável ferrítico tipo 430 estabilizado com Nb, com e sem recozimento após laminação a quente, foi laminado a frio e submetido a recozimentos isotérmicos em temperaturas de 650, 700, 750 e 800°C por tempos variando entre 10 e 86400 s. A quantificação da fração recristalizada foi realizada pelo modelo de JMAK e pela microdureza ao longo do recozimento. A evolução da textura foi analisada via técnica de EBSD. Ocorreu o refino de grão após a recristalização, resultando em um tamanho médio de 8 µm. A temperatura de recristalização aconteceu a 750°C e esta teve maior efeito na recristalização que o tempo. Os expoentes de Avrami se situaram entre 0.8 e 1.2, significando nucleação em contorno de grão. A taxa de nucleação e de crescimento do grão diminuiu continuamente com o tempo. Em relação à textura, observou-se um aumento da intensidade das componentes (111)[12 1] e (111)[01 1] da fibra γ e diminuição na intensidade da fibra α de deformação. Um modelo de cinética de recristalização do aço tipo 430 estabilizado com nióbio que leva em conta os processos de nucleação e crescimento foi obtido. Palavras-chave: Aço inoxidável ferrítico; Laminação a frio; Recristalização; EBSD. KINETIC AND DEVELOPMENT OF STAINLESS STEEL TEXTURE FERRITIC AISI 430 STABILIZED WITH NIOBIUM, COLD ROLLED AND SUBMITTED TO ANNEALING ISOTHERMAL AbstractThe ferritic stainless steel type 430 stabilized with Nb, with and without annealing after hot rolling, was cold rolled and isothermal annealing at temperatures of 650, 700, 750 and 800°C for times ranging between 10 to 86400 s. The quantification of the recrystallized fraction was performed by the model of JMAK and by the microhardness along the annealing. The evolution of the texture was analyzed via EBSD technique. The grain refining occurred after recrystallization, resulting in a final average size of 8 µm. The recrystallization temperature occurred at 750°C and this effect was higher than the recrystallization time. The Avrami exponent was between 0.8 to 1.2. The nucleation rate and grain growth decreased continuously with time. In texture analysis, there was an increase in intensity of the components (111)[12 1] and (111)[01 1] of γ fiber and decrease in intensity of the α fiber. A recrystallization kinetics model of the steel type 430 stabilized with Nb, which takes into account the nucleation and growth processes was obtained.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.