Wood Plastic Composites (WPCs) are well‐known products which combine the high mechanical properties of wood with the high hydrophobicity and formability of polypropylene (PP). They are largely used for decking, cladding and flooring for outdoor constructions but they still present some drawbacks due to the limited chemical affinity of the two materials. In this paper, the addition of mimosa (Acacia mearnsii) tannin as compatibilizer was tested and these composites were characterized via SEM, TGA, DSC, DMA, mechanical testing, water absorption and contact angle. The tannin‐containing WPC presented lower interspaces between PP and lignocellulosic matrix, higher hydrophobicity and comparable mechanical performances. These results were due to the high compatibilization effect of the tannin, which allow getting similar results with 15% less lignocellulosic material. The lower crystallinity observed for PP in tannin‐containing composites allowed a better contact between the wooden fractions. Although good physical compatibilization was obtained no evidences of chemical bonding were observed by FT‐IR. The enhanced interphase contact and the higher hydrophobicity registered for the tannin‐containing WPCs suggest that this natural, easily available extract can be a cheap and green additive to enhance the service‐life for outdoor applications. POLYM. COMPOS., 39:4275–4284, 2018. © 2017 Society of Plastics Engineers
http://dx.doi.org/10.5902/1980509819676O objetivo desta pesquisa foi avaliar as propriedades físico-mecânicas de painéis de lâminas paralelas (LVL) com camadas de Polímeros Reforçados de Fibra de Vidro (PRFV) impregnadas com dois tipos de matrizes. Primeiramente foi realizada a fabricação dos painéis LVL com nove camadas de lâminas de madeira unidas com resina à base de fenol-formaldeído na gramatura de 190 g/m2 em linha simples. Posteriormente, foi feita a aplicação do reforço de fibra de vidro impregnado com resinas epóxi ou poliéster isoftálica com NPG. Os tratamentos consistiram na aplicação de uma a quatro camadas de fibra de vidro impregnadas com resina epóxi ou isoftálica, totalizando 21 painéis. As propriedades avaliadas foram a massa específica, o teor de umidade, a flexão estática na posição flatwise e egdewise e a resistência ao cisalhamento na linha de cola. Em flexão estática na posição flatwise, uma camada de PRFV, em tratamentos com resina epóxi e isoftálica, foi suficiente para influenciar o módulo de elasticidade (MOE), enquanto para o módulo de ruptura (MOR), duas camadas de PRFV foram necessárias para tratamentos com resina isoftálica e uma camada para tratamentos com resina epóxi. Na posição edgewise, os valores de MOE e do MOR se mantiveram estáveis após a aplicação de duas camadas de PRFV. A resina epóxi apresentou maior resistência ao cisalhamento e maior percentual de falhas na madeira, enquanto a resina isoftálica, apesar de apresentar valores de resistência similares à fenólica, não apresentou boa adesão à madeira, representada pelo baixo percentual de falhas na madeira. Portanto, a aplicação de uma camada de PRFV com resina epóxi na posição de tração seria o suficiente para melhorar as qualidades mecânicas (flexão estática e cisalhamento) dos painéis LVL fabricados com lâminas de madeira de pinus unidas com fenol-formaldeído.
A interação de plantios florestais com a precipitação influi tanto no crescimento e desenvolvimento da floresta quanto na disponibilidade de água para percolação e abastecimento do lençol freático, e assim, a fase de desenvolvimento do povoamento é um aspecto relevante a ser observado. Objetivou-se avaliar a precipitação pluviométrica em Eucalyptus dunnii através do monitoramento de um povoamento durante o período de um ano, com início aos 16 meses de idade, no município de Alegrete-RS. A precipitação dentro do povoamento foi mensurada por meio de coletores de precipitação interna e coletores de solução decorrente do escorrimento pelo tronco. Já a precipitação total foi avaliada por coletores de precipitação instalados fora do povoamento e sem interferência do dossel florestal. A interceptação da precipitação pelo povoamento foi de 7 % da precipitação total e a precipitação interna correspondeu a 98 % da precipitação efetiva, sendo os 2 % restantes relativos ao escorrimento pelo tronco. Os valores das formas de interação da precipitação com o povoamento variaram ao longo dos meses de avaliação. Palavras-chave:Hidrologia florestal; Pluviosidade; Precipitação interna; Interceptação; Escorrimento pelo tronco.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.