Microencapsulated phase change materials (PCMs) are attracting increasing attention as functional fillers in polymer matrices, to produce smart thermoregulating composites for applications in thermal energy storage (TES) and thermal management. In a polymer composite, the filler–matrix interfacial adhesion plays a fundamental role in the thermomechanical properties. Hence, this work aims to modify the surface of commercial PCM microcapsules through the formation of a layer of polydopamine (PDA), a bioinspired polymer that is emerging as a powerful tool to functionalize chemically inert surfaces due to its versatility and great adhesive potential in many different materials. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) evidenced that after PDA coating, the surface roughness increased from 9 to 86 nm, which is beneficial, as it allows a further increase in the interfacial interaction by mechanical interlocking. Spectroscopic techniques allowed investigating the surface chemistry and identifying reactive functional groups of the PDA layer and highlighted that, unlike the uncoated microcapsules, the PDA layer is able to react with oxirane groups, thereby forming a covalent bond with the epoxy matrix. Hot-stage optical microscopy and differential scanning calorimetry (DSC) highlighted that the PDA modification does not hinder the melting/crystallization process of the paraffinic core. Finally, SEM micrographs of the cryofracture surface of epoxy composites containing neat or PDA-modified microcapsules clearly evidenced improved adhesion between the capsule shell and the epoxy matrix. These results showed that PDA is a suitable coating material with considerable potential for increasing the interfacial adhesion between an epoxy matrix and polymer microcapsules with low surface reactivity. This is remarkably important not only for this specific application but also for other classes of composite materials. Future studies will investigate how the deposition parameters affect the morphology, roughness, and thickness of the PDA layer and how the layer properties influence the capsule–matrix adhesion.
A new approach using X-ray photoelectron spectroscopy (XPS) was employed to give insight into the reduction of graphene oxide (GO) using a green approach with polydopamine (PDA). In this approach, the number of carbon atoms bonded to OH and to nitrogen in PDA is considered and compared to the total intensity of the signal resulting from OH groups in polydopamine-reduced graphene oxide (PDA-GO) to show the reduction. For this purpose, GO and PDA-GO with different times of reduction were prepared and characterized by Raman Spectroscopy and XPS. The PDA layer was removed to prepare reduced graphene oxide (RGO) and the effect of all chemical treatments on the thermal and electrical properties of the materials was studied. The results show that the complete reduction of the OH groups in GO occurred after 180 min of reaction. It was also concluded that Raman spectroscopy is not well suited to determine if the reduction and restoration of the sp2 structure occurred. Moreover, a significant change in the thermal stability was not observed with the chemical treatments. Finally, the electrical powder conductivity decreased after reduction with PDA, increasing again after its removal.
Thin microstructured poly(methyl methacrylate) (PMMA) films may be used as scaffolds for biosensor arrays. Microstructured pores form miniaturized vessels, each constituting an individual reaction vessel or detector element. Arrays of micropores with diameters between 2 and 80 microm were prepared in thin PMMA films on gold by optical lithography. Laterally resolved chemical information for microstructured PMMA films on a gold substrate was obtained by FTIR spectroscopic imaging. The carbonyl band was used to characterize the microstructure. Spectroscopic results indicate small amounts of PMMA residues inside the pores. A downshift of 5 cm(-1) compared to the position of the PMMA bulk carbonyl band indicates interactions of the PMMA residue with the gold substrate. Additional small bands are observed which indicate the formation of carboxylate during PMMA microstructuring. Three possible types of strong PMMA-gold interactions are discussed. All strong PMMA-gold interactions involve carbonyl or carboxyl oxygen.
Thermal induced solid phase polymer reactions between bisphenol‐A‐based polycarbonate (PC) and polyvinylamine (PVAm) are used to form permanent composite material. The PC–PVAm interface is characterized by infrared (IR) spectroscopy. IR spectra of synthesized reference substances which can be expected after PC–PVAm reaction are recorded and used to identify amidation product structures within the PC–PVAm interphase. Curve fit analysis is performed to isolated sub‐bands. The spectral position of the carbonyl absorption band is a suitable marker for the identification of different amidation products. While the formation of urethane and cyclic Allophanate points to the formation of a co‐polymer cyclic Urea indicates a PC chain scission without binding between both polymer materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.