No abstract

Active magnetic bearings (AMBs) have become a key technology in various industrial applications. Self-sensing AMBs provide an integrated sensorless solution for position estimation, consolidating the sensing and actuating functions into a single electromagnetic transducer. The approach aims to reduce possible hardware failure points, production costs, and system complexity. Despite these advantages, self-sensing methods must address various technical challenges to maximize the performance thereof. This paper presents the direct current measurement (DCM) approach for self-sensing AMBs, denoting the direct measurement of the current ripple component. In AMB systems, switching power amplifiers (PAs) modulate the rotor position information onto the current waveform. Demodulation self-sensing techniques then use bandpass and lowpass filters to estimate the rotor position from the voltage and current signals. However, the additional phase-shift introduced by these filters results in lower stability margins. The DCM approach utilizes a novel PA switching method that directly measures the current ripple to obtain duty-cycle invariant position estimates. Demodulation filters are largely excluded to minimize additional phase-shift in the position estimates. Basic functionality and performance of the proposed self-sensing approach are demonstrated via a transient simulation model as well as a high current (10 A) experimental system. A digital implementation of amplitude modulation self-sensing serves as a comparative estimator.

Energy is a universal concept that can be used across physical domains to describe complex large-scale industrial systems. This brief survey and framework gives a perspective on energy as a unifying domain for system modelling, supervision, and control. Traditionally, modelling and control problems have been approached by adopting a signal-processing paradigm. However, this approach becomes problematic when considering non-linear systems. A behavioural viewpoint, which incorporates energy as basis for modelling and control, is considered a viable solution. Since energy is seen as a unifying concept, its relationship to Euler-Lagrange equations, state space representation, and Lyapunov functions is discussed. The connection between control and process supervision using passivity theory coupled with a system energy balance is also established. To show that complex industrial systems comprising multiple energy domains can be modelled by means of a single electric circuit, its application to a large-scale thermo-hydraulic system is presented. Next, a simple non-linear transmission impedance electric circuit is used to illustrate how energy can be used to not only describe a system, but also serve as basis for system optimisation. An energy-based framework is proposed whereby energy is used as a unifying domain to work in, to analyse, and to optimise large-scale industrial systems.

No abstract

No abstract

No abstract

No abstract

No abstract