The aim of the present study is to investigate the microstructure-property relation in polymethyl methacrylate (PMMA)-based porous mould materials used for high-pressure casting of ceramic articles. For this purpose, porous plastic materials were produced by the polymerization of water-in-oil emulsions with various compositions of emulsion constituents and particle sizes of the filler PMMA beads. Pore morphology, porosity and water permeability of the materials were measured. The compressive stress-strain behavior, collapse stress and elastic modulus values of the macroporous materials were determined by performing compressive mechanical testing. Fracture toughness values of the materials were also measured using the single-edge notched bending method. The results showed that the concentration of emulsion constituents and PMMA bead sizes has significant effects on the pore morphology, porosity, water permeability and mechanical properties of the porous plastics.
Abstract. The ceramic whiteware/sanitaryware industry is rapidly undergoing to implement highpressure casting techniques for ceramic article production. In these techniques, materials with open pore microstructure that allows drainage of water under applied pressure are needed. The polymethyl methacrylate (PMMA) based polymeric porous materials have become the most suitable type of materials for this purpose because of their short casting periods and high service lives. However, the superior service life and performance of these materials are closely related to the microstructure. In the present study, the porous materials with various compositions of the constituents in the emulsion were produced to effect the microstructure of PMMA-based materials. The variations on the pore microstructure were interrelated to the performance of the material for high-pressure sanitaryware casting. The pore morphology and water permeability of the samples was measured using optical and SEM microscopy and permeability measurement techniques, respectively. The compressive collapse stress and modulus values were determined by performing compression testing. The results showed a significant interrelation between microstructure and the performance of the PMMA-based ceramic mould materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.