ZnO:Al thin films were prepared on glass substrates by radio frequency RF magnetron sputtering from a ceramic ZnO target mixed with Al2O3 (1 wt%) in pure argon atmosphere with a power of 250 W. Two series of samples were deposited, the first one as a function of the substrate temperature (between 20 and 325 • C) at 0.12 Pa, the second one as a function of the working pressure (between 0.01 and 2.2 Pa) at room temperature. The influence of these deposition parameters was studied by a detailed microstructural analysis using X-Ray diffraction and Raman spectroscopy. Their electrical properties were characterized by Hall effect measurements. As the substrate temperature is increased, crystallite size increases while the strain and the electrical resistivity decrease. An improvement of the crystallinity is deduced from Raman spectra and X-Ray diffraction patterns. From the pressure series, an electrical optimum is observed at 0.12 Pa. Above 0.12 Pa, there is a degradation of the crystallinity, attributed to the low mobility of the adatoms and below 0.12 Pa, high-energy sputtered particles damage the growing films. The trends given by Thornton structure zone model are also consistent with X-Ray diffraction results.
The gaseous atmosphere plays a major role in the quality of the manufactured parts in Laser Powder Bed Fusion (L-PBF) by protecting the metal from high temperature oxidation. If argon and nitrogen are the most commonly used gases, helium has almost never been considered as a possible candidate as a chemically inert shielding gas. To provide a better understanding of the influence of the gas atmosphere on the process stability, a comparative study of L-PBF manufacturing under argon and helium atmospheres has been carried out, considering a nickelbased alloy Inconel® 625 and a single bead configuration. To this end, in-situ process measurements were carried out on a dedicated experimental setup. The melt pool behaviour, the expansion of the vapour plume and the amount of spatters were evaluated with high-speed imaging for the two gases considered, together with the final L-PBF bead dimensions. Results were also compared to single fusion beads carried out in an industrial L-PBF machine for a comparable range of volume energy densities. The influence of the shielding atmosphere on L-PBF single beads was as follows: (1) dimensions of beads were shown to be constant whatever the gas; (2) fewer and smaller spatters were produced under helium atmosphere, especially for high volume energy densities. Physical mechanisms were then discussed to understand those specific effects.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.