Polymer–multiwalled carbon nanotube composite films were fabricated using two types of polymer matrices, namely poly(vinyl alcohol), (PVA) and chlorinated polypropylene. In the first case, the PVA was observed to form a crystalline coating around the nanotubes, maximising interfacial stress transfer. In the second case the interface was engineered by covalently attaching chlorinated polypropylene chains to the nanotubes, again resulting in large stress transfer. Increases in Young's modulus, tensile strength, and toughness of × 3.7, × 4.3, and × 1.7, respectively were observed for the PVA‐based materials at less than 1 wt.‐% nanotubes. Similarily for the polypropylene‐based composites, increases in Young's modulus, tensile strength and toughness of × 3.1, × 3.9, and × 4.4, respectively, were observed at equivalent nanotube loading levels. In addition, a model to describe composite strength was derived. This model shows that the tensile strength increases in proportion to the thickness of the interface region. This suggests that composite strength can be optimized by maximising the thickness of the crystalline coating or the thickness of the interfacial volume partially occupied by functional groups.

Metamaterials are a promising new class of materials, in which sub-wavelength physical structures, rather than variations in chemical composition, can be used to modify the nature of their interaction with electromagnetic radiation. Here we show that a metamaterials approach, using a discrete physical geometry (conformation) of the segments of a polymer chain as the vector for a substantial refractive index change, can be used to enable visible wavelength, conjugated polymer photonic elements. In particular, we demonstrate that a novel form of dip-pen nanolithography provides an effective means to pattern the so-called β-phase conformation in poly(9,9-dioctylfluorene) thin films. This can be done on length scales ≤500 nm, as required to fabricate a variety of such elements, two of which are theoretically modelled using complex photonic dispersion calculations.

The fused, bicyclic molecule, 2,1,3‐Benzothiadiazole (BT), has become a key ingredient in the design of new organic semiconductors for light emission and energy harvesting applications. Here, the synthesis is reported of a series of trigonal, star‐shaped compounds comprising a truxene core and three quater‐dialkylfluorene arms into each of which a BT unit is inserted sequentially at each possible position (T4BT‐A to T4BT‐E). Analysis of the resulting electronic properties shows that as a consequence of conjugative coupling to the core and the resulting symmetry there are three distinct locations for the BT unit and the influence that these locations have on light emission and other spectroscopic characteristics is discussed. The systematic variation in photophysical properties for the different structural isomers helps to clarify the influence of BT unit addition to 9,9‐dialkylfluorene chains. It also helps to establish a design template for the construction of donor‐acceptor conjugated materials with targeted properties. For T4BT‐E with a BT unit at the terminal position of each arm, the photoluminescence quantum efficiency is significantly reduced and no amplified spontaneous emission is observed under typical pumping conditions. Theoretical calculations assist in understanding the variation in behaviors among the T4BT‐X family of compounds, especially in relation to their photoluminescence decay times and the Raman scattering intensities of their dominant BT‐unit‐centred molecular vibrations.

The synthesis of three new 1,4‐diketo‐3,6‐diphenyl‐pyrrolo[3,4‐c]pyrrole (DPP) macromolecules appended with two or four quaterfluorene arms is reported. The compounds absorb mainly through the oligofluorene units and emit through the DPP core. Optical gain has been observed for Linear‐c, a two‐armed structure in which the quaterfluorene units are conjugated through the core unit.