NEXT-100 is an electroluminescent high-pressure xenon gas time projection chamber that will search for the neutrinoless double beta (0νββ) decay of 136 Xe. The detector possesses two features of great value for 0νββ searches: energy resolution better than 1% FWHM at the Q value of 136 Xe and track reconstruction for the discrimination of signal and background events. This combination results in excellent sensitivity, as discussed in this paper. Material-screening measurements and a detailed Monte Carlo detector simulation predict a background rate for NEXT-100 of at most 4 × 10 −4 counts keV −1 kg −1 yr −1 . Accordingly, the detector will reach a sensitivity to the 0νββ-decay half-life of 2.8 × 10 25 years (90% CL) for an exposure of 100 kg · year, or 6.0 × 10 25 years after a run of 3 effective years.

In this Technical Design Report (TDR) we describe the NEXT-100 detector that will search for neutrinoless double beta decay (β β 0ν) in 136 Xe at the Laboratorio Subterráneo de Canfranc (LSC), in Spain. The document formalizes the design presented in our Conceptual Design Report (CDR): an electroluminescence time projection chamber, with separate readout planes for calorimetry and tracking, located, respectively, behind cathode and anode. The detector is designed to hold a maximum of about 150 kg of xenon at 15 bar, or 100 kg at 10 bar. This option builds in the capability to increase the total isotope mass by 50% while keeping the operating pressure at a manageable level. The readout plane performing the energy measurement is composed of Hamamatsu R11410-10 photomultipliers, specially designed for operation in low-background, xenon-based detectors. Each individual PMT will be isolated from the gas by an individual, pressure resistant enclosure and will be coupled to the sensitive volume through a sapphire window. The tracking plane consists in an array of Hamamatsu S10362-11-050P MPPCs used as tracking pixels. They will be arranged in square boards holding 64 sensors (8 × 8) with a 1-cm pitch. The inner walls of the TPC, the sapphire windows and the boards holding the MPPCs will be coated with tetraphenyl butadiene (TPB), a wavelength shifter, to improve the light collection.

NEXT-DEMO is a high-pressure xenon gas TPC which acts as a technological testbed and demonstrator for the NEXT-100 neutrinoless double beta decay experiment. In its current configuration the apparatus fully implements the NEXT-100 design concept. This is an asymmetric TPC, with an energy plane made of photomultipliers and a tracking plane made of silicon photomultipliers (SiPM) coated with TPB. The detector in this new configuration has been used to reconstruct the characteristic signature of electrons in dense gas. Demonstrating the ability to identify the MIP and "blob" regions. Moreover, the SiPM tracking plane allows for the definition of a large fiducial region in which an excellent energy resolution of 1.82% FWHM at 511 keV has been measured (a value which extrapolates to 0.83% at the xenon Q β β ).

A new experimental technique for measuring the mobilities of positive ions in their parent gases is presented. The technique was applied to the rare gases, Ar, Kr, and Xe, and, for pressures typically below 10 Torr, two different types of positive ions were observed. The reduced mobilities of these ions in their parent gases were measured as a function of E/N, the ratio of the electric field strength to the gas number density, at a temperature of 300±1 K. The results were compared with others available in the literature and the two ions were identified as being the atomic and the dimer rare gas ions. The results are in good agreement with those from other authors. Space charge and impurities effects are discussed.

A new type of microstructure device for a gas radiation detector is proposed. This microstructure, the microhole and strip plate structure, merges the structures of a gas electron multiplier and a microstrip plate in one single plate. This design allows two-multiplication stages and a separation of the sensitive and the detection regions, with full optical positive feedback suppression. Simulations for gas gain and electron transparency of the microstructure are presented. Different applications are discussed.