The authors have developed a semitransparent, multilayered cathode of indium tin oxide (ITO)/Ag/tungsten oxide (WO3) for transparent organic light-emitting diodes. The device showed a weak negative differential resistance (NDR), until the operating voltage of 8V was reached. NDR was due to the resonant tunneling by both the quantum barrier and quantum well. The silver oxide (Ag2O) on the Ag metal was confirmed by x-ray photoelectron spectroscopy, and the energy levels of Ag2O were quantized due to the quantum size effect and this produced the resonant tunneling channels. The device using ITO∕Ag∕WO3 with a LiF∕Al bilayer was superior to those devices which only used ITO or WO3, mainly because the out coupling was enhanced by employing a WO3 material, which is much more transparent than ITO.
The authors introduce variable liquid crystal (LC) pretilt angles via ion beam (IB) irradiation of silicon carbide (SiC) layers of various compositions. To control the composition of the SiC layer, the authors altered the rf power ratio between the graphite target and silicon target. The pretilt angle of the silicon-rich SiC layer was constant regardless of IB irradiation angle; however, the carbon-rich SiC layer showed variable pretilt angles, depending on IB irradiation angle. The authors attribute variable pretilt angle to the competition between van der Waals interactions, favoring the vertical alignment, and pi-pi interactions, favoring the LC alignment parallel to IB direction.
Homogeneous and homeotropic orientations of nematic liquid crystal (NLC) are investigated on various inorganic thin films which are exposed to Ar ion-beam. It is the novel investigations which results in a completely dry processing technique for both the thin film deposition and alignment steps. In the case of homogenous alignment on diamond-like carbon (DLC) layer, optical band gap and the polar surface energy are investigated in order to elucidate the alignment mechanism by ion beam (IB) irradiation. We elucidate the role of surface polarity in DLC films with respect to the LC orientation. On the other hand, FDLC thin films are selected by homeotropic alignment layer with regard to the relationship between surface tension and LC orientation. Selected pretilt angles in the range of 71.1–89.8° can be easily obtained with ion beam irradiation. It is sensitively changed by thin films composition and the angle of ion beam irradiation.
The authors demonstrate the production of amorphous fluorinated carbon (a-C:F) thin film with adjustable wetting properties, inducing variable liquid crystal (LC) pretilt angles. To control the surface wetting properties, they apply a dual radio frequency magnetron system with a controlled power ratio of targets. In this manner we obtain various compositional surfaces with fluorine and carbon components and adjust the surface energy with regard to the various compositions. Whereas the fluorine-rich a-C:F layer shows a preference for homeotropic (vertical) LC alignment, the carbon-rich a-C:F layer shows a planar LC alignment. To achieve uniform LC alignment with a proper pretilt angle, an accelerated Ar+ ion beam irradiates the films after the deposition process. The ion beam selectively destroys the surface bonding of the a-C:F films, yielding an intermediate pretilt angle.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.