Unique multifunctional coatings, comprising a 3D superhydrophobic agent and two nanostructured photocatalysts (solar-light sensitive 50/50 and 10/90 TiO 2 -ZnO nanoheterostructures), compatible with the inorganic substrates of the Built Heritage, have been designed.The synthesized nanoparticles showed an enhanced photocatalytic activity (tested by NO degradation) as compared with the raw TiO 2 and ZnO materials.Dispersing agents were used to optimize the coatings, avoiding agglomeration of the photocatalytic nanoparticles and increasing the stability of the suspensions. Four distinct dispersions were optimized and applied as coatings onto stony materials used in the Built Heritage, such as sandstone, lime mortar, granite and limestone. Their effectiveness was assessed by assessing hydrophobicity of the surfaces (static water contact angle), photocatalytic activity and self-cleaning as well as water vapour permeability of the treated specimens. These transparent coatings demonstrated high compatibility with the construction materials of the Architectural Heritage and showed a synergistic effect rendering a minimized water absorption, self-cleaning ability evidenced by the reduced adsorption of soiling deposits and a reasonable degradation of any trace that might be adsorbed, as well as a protecting hydrophobic environment for the photocatalyst.

This paper presents the experimental procedure to develop air lime-based injection grouts, including polymeric superplasticizers, a water repellent agent and pozzolanic agents as additives. Our research focuses on the development of grouts to improve various characteristics simultaneously by combining different additions and admixtures. Aiming to improve the injectability of the grouts, in this study, different polymeric superplasticizers were added, namely polycarboxylated-ether derivative (PCE), polynaphthalene sulfonate (PNS) and condensate of melamine-formaldehyde sulfonate (SMFC). As a water-repellent agent, sodium oleate was used to reduce the water absorption. The enhancement of the strength and setting time was intended by using microsilica and metakaolin as pozzolanic mineral additions. Compatibility between the different admixtures and action mechanism of the different polymers were studied by means of zeta potential and adsorption isotherms measurements. Diverse grout mixtures were produced and investigated by assessing their injectability, fluidity, stability, compressive strength, hydrophobicity and durability. This research led to several suitable mixtures produced by using more than one component, to enhance efficiency and to provide better performance of grouts. According to the results, the grout composed of air lime, metakaolin, sodium oleate and PCE was found to be the most effective composition, improving the mechanical strength, injectability and hydrophobicity.

No abstract

No abstract