This paper presents an overview of municipal solid waste management (MSWM) for both technical and regulatory arrangements in the municipality of Phnom Penh (MPP), Cambodia. Problems with the current MSWM are identified, and challenges and recommendations for future improvement are also given in this paper. MPP is a small city with a total area of approximately 374 km(2) and an urban population of about 1.3 million in 2008. For the last 14 years, average annual municipal solid waste (MSW) generated in MPP has increased rapidly from 0.136 million tons in 1995 to 0.361 million tons in 2008. The gross generation rate of MSW per capita was 0.74 kg day(-1). However, the per capita household waste generation was 0.487 kg day(- 1). At 63.3%, food waste is the predominant portion of generated waste, followed by plastics (15.5%), grass and wood (6.8%), and paper and cardboard (6.4%). The remaining waste, including metals, glass, rubber/leather, textiles, and ceramic/ stone, accounted for less than 3%. Waste recycling through informal sectors is very active; recycled waste accounted for about 9.3% of all waste generated in 2003. Currently, the overall technical arrangement, including storage and discharge, collection and transport, and disposal, is still in poor condition, which leads to environmental and health risks. These problems should be solved by improving legislation, environmental education, solid waste management facilities, and management of the waste scavengers.

No abstract

Waste activated sludge (WAS) requires a long digestion time because of a rate-limiting hydrolysis step - the first phase of anaerobic digestion. Pretreatment of WAS facilitates the hydrolysis step and improves the digestibility. This study examined the effects of ultrasonic, chemical, and combined chemical-ultrasonic pretreatments on WAS disintegration and its subsequent digestion at different solids retention times (SRTs). The efficient conditions for each pretreatment were evaluated based on per cent soluble chemical oxygen demand (%SCOD). The results showed that the combined chemical-ultrasonic pretreatment resulted in better WAS disintegration, based on %SCOD release, compared with individual chemical and ultrasonic pretreatments. At the optimum operating conditions of the combined chemical-ultrasonic pretreatment (NaOH dose of 10 mg g(-1) TS (total solids) and specific energy input of 3.8 kJ g(-1)TS), the %SCOD release was 18.1% +/- 0.5%, whereas 13.5% +/- 0.9%, 13.0% +/- 0.5% and 1.1% +/- 0.1% corresponded to individual chemical (50 mg g(-1) TS) and ultrasonic (3.8 kJ g(-1) TS) pretreatments and control (without pretreatment), respectively. The anaerobic digestion studies in continuous stirred tank reactors showed an increase in methane production of 23.4% +/- 1.3% and 31.1 +/- 1.2% for digesters fed with WAS pretreated with ultrasonic and combined chemical-ultrasonic, respectively, with respect to controls at the effective SRT of 15 days. The highest total solids removal was achieved in the digester fed with ultrasonic pretreated WAS (16.6% +/- 0.3%), whereas the highest volatile solids removal was achieved from the digester fed with combined chemical-ultrasonic pretreated WAS (24.8 +/- 0.4%). The findings from this study are a useful contribution to new pretreatment techniques in the field of sludge treatment technology through anaerobic digestion.

Characterization of anthracene metabolites produced by Armillaria sp. F022 was performed in the enzymatic system. The fungal culture was conducted in 100-mL Erlenmeyer flask containing mineral salt broth medium (20 mL) and incubated at 120 rpm for 5-30 days. The culture broth was then centrifuged at 10,000 rpm for 45 min to obtain the extract. Additionally, the effect of glucose consumption, laccase activity, and biomass production in degradation of anthracene were also investigated. Approximately, 92 % of the initial concentration of anthracene was degraded within 30 days of incubation. Dynamic pattern of the biomass production was affected the laccase activity during the experiment. The biomass of the fungus increased with the increasing of laccase activity. The isolation and characterization of four metabolites indicated that the structure of anthracene was transformed by Armillaria sp. F022 in two routes. First, anthracene was oxidized to form anthraquinone, benzoic acid, and second, converted into other products, 2-hydroxy-3-naphthoic acid and coumarin. Gas chromatography-mass spectrometry analysis also revealed that the molecular structure of anthracene was transformed by the action of the enzyme, generating a series of intermediate compounds such as anthraquinone by ring-cleavage reactions. The ligninolytic enzymes expecially free extracellular laccase played an important role in the transformation of anthracene during degradation period.

The elevation of waste generation subsequent to population growth has become a severe environmental topic in Malaysia. Since most of the waste is being dumped into a landfill, the open dumpsite, or unsanitary landfills which are not constructed with proper engineering plan, severe impacts on the environment result. The energy demand in Malaysia increased with the growing population, but reliance on fossil fuels to generate electricity has created another greenhouse gas contributor. Alternatively, waste-to-energy technology solves the problem of increasing waste by converting the waste to a renewable energy source. Malaysia has moved towards landfill gas recovery system and incineration for waste energy recovery. The recovery system and refuse-derived fuel plant achieved expectation; however, the incineration plants have failed due to the opposition of the public, lack of funding and technician expertise, and other technical issues. The solid waste management practices lacking separation and recycling sources, become an obstacle for development. The government puts effort into solving the current issue by promoting recycling in the public, enforcing the legislation, and approaching new technologies for better solid waste management practice in the future. This paper aims to discuss the application of energy recovery from municipal solid waste in Malaysia.

This paper presents a mathematical model of vertical water movement and a performance evaluation of the model in static pile composting operated with neither air supply nor turning. The vertical moisture content (MC) model was developed with consideration of evaporation (internal and external evaporation), diffusion (liquid and vapour diffusion) and percolation, whereas additional water from substrate decomposition and irrigation was not taken into account. The evaporation term in the model was established on the basis of reference evaporation of the materials at known temperature, MC and relative humidity of the air. Diffusion of water vapour was estimated as functions of relative humidity and temperature, whereas diffusion of liquid water was empirically obtained from experiment by adopting Fick's law. Percolation was estimated by following Darcy's law. The model was applied to a column of composting wood chips with an initial MC of 60%. The simulation program was run for four weeks with calculation span of 1 s. The simulated results were in reasonably good agreement with the experimental results. Only a top layer (less than 20 cm) had a considerable MC reduction; the deeper layers were comparable to the initial MC, and the bottom layer was higher than the initial MC. This model is a useful tool to estimate the MC profile throughout the composting period, and could be incorporated into biodegradation kinetic simulation of composting.

Organic solid waste composting is a complex process that involves many coupled physical, chemical and biological mechanisms. To understand this complexity and to ease in planning, design and management of the composting plant, mathematical model for simulation is usually applied. The aim of this paper is to develop a mathematical model of organic substrate degradation and its performance evaluation in solid waste windrow composting system. The present model is a biomass-dependent model, considering biological growth processes under the limitation of moisture, oxygen and substrate contents, and temperature. The main output of this model is substrate content which was divided into two categories: slowly and rapidly degradable substrates. To validate the model, it was applied to a laboratory scale windrow composting of a mixture of wood chips and dog food. The wastes were filled into a cylindrical reactor of 6 cm diameter and 1 m height. The simulation program was run for 3 weeks with 1 s stepwise. The simulated results were in reasonably good agreement with the experimental results. The MC and temperature of model simulation were found to be matched with those of experiment, but limited for rapidly degradable substrates. Under anaerobic zone, the degradation of rapidly degradable substrate needs to be incorporated into the model to achieve full simulation of a long period static pile composting. This model is a useful tool to estimate the changes of substrate content during composting period, and acts as a basic model for further development of a sophisticated model.

The utilization of less expensive and more effective adsorbents derived from a variety of basic materials has been investigated. The research aimed to investigate the feasibility of employing waste paper as the adsorbent to remove the cresol red (CR) dye from wastewater through adsorption mechanism. Langmuir, Jovanovic, and Freundlich model were observed for isotherms models, while pseudo-first-order and pseudo-second-order were examined for kinetic models. The results indicated that increasing the adsorbent dose and contact time gave no significant effect to adsorption capacity while adsorption capacity increased with the increasing of pH until it reached a maximum at pH 8, and raising the starting dye concentration leads in a significant increase in adsorption capacity (16.7 mg/g). When the experimental adsorption isotherms and kinetic were fitted using the Freundlich models and pseudo-second-order model, it was discovered that those models were more accurately represented by the data, as indicated by a high correlation coefficient (R2) of 0.974 and 0.963.