2019 yılının son günlerinde ortaya çıkan küresel Covid-19 salgını nedeniyle Mart 2020 tarihi itibari ile üniversite öğrencileri zorunlu olarak uzaktan eğitim almak durumunda kalmışlardır. Bu zorunlu süreçte öğrencilerin eğitim verimliliği, memnuniyeti, çalışma performansları gibi çeşitli faktörler, sahip oldukları fiziksel, mekânsal, sosyal şartlardan etkilenmiştir. Bu çalışmada; mimarlık fakültelerinde önemli bir yeri olan atölye çalışmalarını, konut ortamlarında gerçekleştirmek zorunda kalan öğrencilerin içinde bulundukları ergonomik koşullar irdelenmiştir. Yıldız Teknik Üniversitesi Mimarlık Fakültesi öğrencileri üzerinde araştırma yapılmıştır. Literatür taramasında öğrencilerin karşılaşabilecekleri birtakım sorunlar: antropometrik ve duyusal olarak belirlenmiştir. Betimsel araştırma yöntemi ile yapılan çalışmada, verileri toplamak için oluşturulan anket çevrimiçi olarak iletilmiş; 212 öğrencinin cevapları dikkate alınmıştır. Araştırma sonucuna göre antropometrik sorunların (n=4,55) ve görsel sorunların (n=4,38) görülme sıklığı yüksektir. İşitsel sorunlar (n=3,54) ve termal koşullara bağlı sorunlarla (ngüz=2,73 nbahar=3,32) ise orta sıklıkta karşılaşılmaktadır. Bu sorunların giderilmesi için öneriler geliştirilmiştir.
Sağlık binaları, halkın sağlığına hizmet vermek için tasarlanan ve bu doğrultuda gereken teşhis ve tedavi süreçlerinin yürütüldüğü yapılardır. Bulundukları bölgede yaşayan kişilere temel; koruyucu, tedavi edici ve rehabilite edici hizmetler sunarlar, büyük ölçekli ve kompleks binalar değillerdir. Ancak bu binaların birtakım ergonomik koşulları, belli ölçülerde işitsel, görsel, mekânsal ve termal konfor koşullarını sağlaması gerekmektedir. Sağlık sorunları yaşayan bireyler tarafından yoğun olarak ziyaret edildikleri için, bu kullanıcılara yönelik, ergonomik kalite standartlarını karşılaması beklenmektedir. Bu çalışmada yapılan literatür araştırması ile ortaya konan birtakım ölçütler, 1.basamak sağlık binalarında ergonomik kalitenin değerlendirilmesi amacıyla derlenmiştir. Bina değerlendirmesi için kullanım sonrası değerlendirme (KSD) yöntemi seçilmiştir. Bütüncül bir yaklaşımla birden fazla değerlendirme ölçütünün sistematik analizi için bir yaklaşım geliştirilmiştir. Bu yaklaşım seçilen bir aile sağlığı merkezi binasında test edilerek denenmiştir. Binada gözlem, ölçüm, görüşme tekniklerden faydalanılarak veri toplanmıştır. Toplanılan veriler 3’lü likert formülüne göre analiz edilerek değerlendirilmiştir. Çalışmanın sonunda örnek binanın işitsel ve termal konfor düzeyinin iyi (2,60 ≤ x ≤ 3,00), mekânsal ve görsel konfor düzeyinin ise orta (2,14 ≤ x ≤ 2,20) seviyede olduğu sonucuna ulaşılmıştır. Binanın ergonomik kalitesi genel olarak iyi seviyede (x=2,49) değerlendirilirken, mekânsal ve görsel konfor şartlarının iyileştirilmesi için önerilerde bulunulmuştur.
Kentsel açık alanlar kentlinin dinlenme ve sosyalleşme mekânı olarak kamusal alan niteliği taşımaktadır. Ekonomik, sosyal ve fiziksel engel olmadan bir araya gelinmesine olanak sağlayan kamusal alanların herkes için erişilebilir ve aynı ölçüde konforlu olması gerekmektedir. Bu çalışma tasarımcılara kamusal alanlarda yer alan oturma, dinlenme ve bekleme gibi kentsel donatıların antropometrik ve ergonomik ölçütlere uygun olarak tasarımlarının yapılmasına olanak sağlayan sistematik bir tasarım süreci geliştirmeyi hedeflemektedir. Kentsel donatılarda oturarak dinlenme veya yeme-içme eylemi gereksinimi için belirlenen parametreler; kişi sayısı, sırtlıklı / sırtlıksız, kolçaklı / kolçaksız ve masalı / masasız olmasına göre değişmektedir. Kullanacak kişi sayısına bağlı olarak donatı elemanının genişliği değişmektedir. Diğer değişkenler için ortak belirlenen parameterler; oturma yüksekliği, oturma genişliği, oturma derinliği; sırtlıklı ise arkalık eğimi; kolçaklı ise kolçak yüksekliği; masalı ise masanın yerden yüksekliği ve masanın genişliği olarak belirlenmiştir. Ayakta durarak dinlenme veya bekleme “yaslanma” eylemiyle gerçekleştirileceğinden belirlenen parametler donatıyı kullanacak kişi sayısı ve donatının yerden yükseklik değişkenlerine bağlıdır. Çalışma kapsamında parametreler ve değişkenler arasındaki ilişkiyi kurmak amacıyla Rhinoceros programında yer alan ve parametrik tasarım yapmaya olanak sağlayan Grasshopper eklentisi kullanılmıştır. Veri girişinde Microsoft Excel programında hazırlanan tablolardan yararlanılmıştır. Tasarım sürecinde yapılan seçimler ve veri girişleriyle elde edilen üç boyutlu model son tasarım ürünü olarak değil; ileri tasarım aşamasında altlık hazırlama amacını taşımaktadır
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.