Disinfecting, nonbleaching compound 1-chloro-2,2,5,5-tetramethyl-4-imidazolidinone (MC) was uniformly coated onto polypropylene melt-blown nonwoven fabrics having basis-weights of 22 and 50 g/m(2) in order to impart antimicrobial properties via a pad-dry technique. The antimicrobial efficacies of the tested fabrics loaded with MC compound were evaluated against bioaerosols of Staphylococcus aureus and Escherichia coli O157:H7 utilizing a colony counting method. It was determined that both types of coated fabrics exhibited superior antimicrobial efficacy upon exposure to aerosol generation for 3 h. The effect of the coating on air permeability was found to be minimal. Samples were stable for a 6 month time period when they were stored in darkness. However, when the fabrics were exposed to fluorescent light, partial chlorine loss was observed. The MC-coated fabrics exhibited great potential for use in protective face masks and air filters to combat airborne pathogens.

This work demonstrated the successful application of N-halamine technology for wound dressings rendered antimicrobial by facile and inexpensive processes. Four N-halamine compounds, which possess different functional groups and chemistry, were synthesized. The N-halamine compounds, which contained oxidative chlorine, the source of antimicrobial activity, were impregnated into or coated onto standard non-antimicrobial wound dressings. N-halamine-employed wound dressings inactivated about 6 to 7 logs of Staphylococcus aureus and Pseudomonas aeruginosa bacteria in brief periods of contact time. Moreover, the N-halamine-modified wound dressings showed superior antimicrobial efficacies when compared to commercially available silver wound dressings. Zone of inhibition tests revealed that there was no significant leaching of the oxidative chlorine from the materials, and inactivation of bacteria occurred by direct contact. Shelf life stability tests showed that the dressings were stable to loss of oxidative chlorine when they were stored for 6 months in dark environmental conditions. They also remained stable under florescent lighting for up to 2 months of storage. They could be stored in opaque packaging to improve their shelf life stabilities. In vitro skin irritation testing was performed using a three-dimensional human reconstructed tissue model (EpiDerm™). No potential skin irritation was observed. In vitro cytocompatibility was also evaluated. These results indicate that N-halamine wound dressings potentially can be employed to prevent infections, while at the same time improving the healing process by eliminating undesired bacterial growth.

The surfaces of materials fabricated from stainless steel are challenging to functionalize with antimicrobial moieties. This work demonstrates that stainless steel surfaces can be modified with an N-halamine-based copolymer in order to obtain antimicrobial activity. In this regard, a copolymer (HACM) of 2-acrylamido-2-methyl-1-(5-methylhydantoinyl)­propane and 3-cloro-2-hydroxypropyl methacrylate was synthesized and grafted onto a stainless steel surface via covalent attachment. Synthesized monomers and copolymers were characterized by NMR, FTIR, and XPS spectral analyses. Upon treatment with dilute bleach, the stainless steel surfaces were rendered antimicrobial, possessing a sufficient amount of chlorine content and excellent stability and durability. The modified stainless steel samples inactivated 6 logs of Staphylococcus aureus and Escherichia coli O157:H7 bacteria within 15 min of contact time. Stabilities of the coatings toward washing and UVA exposure were also studied. The stainless steel samples showed superior washing stabilities and regenerabilities. After 5 cycles of washing, there was a very minimal change in the initial chlorine contents, and the chlorine content could be recharged to its initial number of Cl+ atoms/cm2. However, only a moderate stability of the coatings was observed after UVA irradiation. These results indicate that N-halamine precursor polymers can be facilely applied to stainless steel surfaces by covalent bonding and that robust, regenerable antimicrobial stainless steel surfaces could be prepared via the N-halamine technology. This technology exhibits potential for use in food processing, prevention of biofilm formation, and biomedical and health-care industries to support the prevention and reduction of cross-contamination and health-care related infections.

The monomer 2-acrylamido-2-methyl-1-(5-methylhydantoinyl)propane (HA) was copolymerized with 3-(trimethoxysilyl)propyl methacrylate (SL) and covalently attached onto silica gel and sand particles. As a result HASL copolymer-grafted silica gel and sand particles (HASL SGPs and SPs) were obtained. These two types of HASL SGPs and SPs provided excellent biocidal efficacy against Gram positive S. aureus and Gram negative E. coli O157:H7 bacteria when the copolymer-grafted particles were exposed to dilute sodium hypochlorite (household bleach) solution. In a flowing water application, seven logs of bacteria were inactivated within 10 s of contact time with the particles packed into a column. The treated particles also exhibited good washing and storage stabilities. The chlorine loss during extensive flow could be recovered by further exposure to dilute bleach solution. The antimicrobial particles have potential application for use in inexpensive disinfecting water filters for slow water flows. V C 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43413.

No abstract