<p>Industri kosmetik adalah industry yang bertumbuh dengan sangat pesat. Tumbuhnya industry kosmetik tersebut menjadikan industry lain yang berhubungan dengan kosmetik turut berkembang. Slah satunya yaitu industry pengemsan. Proses penempelan selotip pada layer karton yang masih manual dikerjakan oleh operator dengan alat potong berupa cutter mengakibatkan seuah industry tidak mampu memenuhi demand konsumen. Pada penelitian ini diekmbangkan sebuah mesin selotip semi otomatis dengan harga yang murah dna mudah dioperasikan. Tujuan dari penelitian ini adalah meningkatkan kapasistas produksi melalui penggantian metode produksi dari konvensional ke semi otomatis. Hasil penelitian menunjukkan efektifitas cycle time sebesar 72% dengan mesin selotip semi otomatis. Kapasitas produksi pun naik 118%.</p>
The objective of the design of a three-layers flat blade smart wind turbine with an Arduino blade angle configuration system is to study experimentally the performance of a wind turbine Three-layersflat blade horizontal guide with various wind speed variations, and apply automatically to blade blade speed average for weather. Tests are carried out to obtain the value of wind turbine power coefficient (Cp). Tests that use variations in wind and blade angle. Variations in wind speed are obtained by variations in refineries from wind turbines. The performance of Three-layersbflat blade wind turbines has the highest Power Coefficiency (Cp) values at certain blade angles on variations in wind speed at a wind speed of 5 m/sec with a blade angle of 15º at 57.84%; at a wind speed of 6 m/sec with a blade angle of 20º of 36.24%; at a wind speed of 7 m/sec with a 25º blade angle of 51.39%; at a wind speed of 8 m / sec with a blade angle of 30º of 39.37%; and at a wind speed of 9 m/s with a blade angle of 35º of 28.24%. After obtaining data about wind speed and angle with the highest Cp value, the wind speed that will be used as the input of the Arduino control system, and the output is a large blade blade that changes to adjust the wind speed.
Kelebihan dari turbin angin poros horizontal yaitu efisiensinya lebih tinggi dibanding turbin angin poros vertikal karena sudu selalu bergerak lurus terhadap arah angin dan menerima daya sepanjang putaran. Tujuan dari tugas akhir ini dibuat untuk mengembangkan tugas akhir tahun 2018 dengan memvariasikan jumlah sudu yaitu 9, 12, dan 15 dan membandingkan kinerja turbin angin dengan menggunakan variasi kecepatan angin. Metode yang digunakan yaitu dengan melakukan tahap penelitian berupa merancang, membuat, dan merakit turbin angin. Turbin angin memiliki dimensi panjang sudu sebesar 650 mm, lebar sisi masuk 60 mm, dan lebar sisi keluar 80 mm. Sedangkan hub memiliki diameter 68,8 mm dan tinggi kerangka 1,5 m. Variabel penelitian meliputi variasi jumlah sudu yaitu 9 buah, 12 buah, dan 15 buah. Data dari hasil pengujian ini kemudian dibuat tabel dan dibandingkan dengan menganalisa grafik karakteristik putaran dan efisiensi. Tahap akhir dari pengujian ini yaitu untuk mendapatkan efisiensi sistem terbaik dengan variabel yang digunakan. Nilai efisiensi pada sudu 9 yaitu sebesar 1,41% pada kecepatan angin 5,15 m/s, pada sudu 12 yaitu sebesar 2,59% pada kecepatan angin 5,58 m/s, dan pada sudu 15 yaitu sebesar 2,68% pada kecepatan angin 5,7 m/s
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.