ResumoO objetivo deste trabalho foi avaliar algumas propriedades mecânicas de cerâmica vermelha como uma função da temperatura de queima. A massa argilosa usada foi caracterizada por meio da determinação da composição química, difração de raios X, distribuição do tamanho de partícula, morfologia, plasticidade e comportamento dilatométrico. Foram conformadas peças cerâmicas por prensagem uniaxial e queimadas a 850 ºC, 950 ºC e 1050 ºC. As peças queimadas foram avaliadas em termos de tensão de ruptura a flexão, módulo de elasticidade flexural, parâmetro de Weibull, tensão característica, massa específica aparente, absorção de água e área superficial específica. A evolução da microestrutura foi acompanhada via microscopia eletrônica de varredura e difração de raios X. Os resultados mostram que a temperatura de queima influencia diretamente nas propriedades mecânicas de cerâmica vermelha. Uma quantidade significativa de poros abertos foi eliminada, principalmente para temperaturas acima de 950 ºC. Os dados de tensão de ruptura a flexão resultaram em distribuição de Weibull, cujos parâmetros de Weibull estão compreendidos na faixa 8,59 -12,42. Palavras-chave: cerâmica vermelha, propriedades mecânicas, porosidade. Efeito da temperatura de queima em algumas propriedades mecânicas de cerâmica vermelha (Effect of the firing temperature on some mechanical properties of red ceramic)
Abstract
The aim of this work was to evaluate some mechanical properties of red ceramic as a function of the firing temperature. The clayey mass was characterized in terms of chemical composition, X-ray diffraction
a b s t r a c tIn ornamental rock industry large amounts of wastes in the form of powder have to be discarded. The reuse of ornamental rock-cutting waste to produce floor tiles for civil construction is described. The waste was added gradually up to 47.5 wt.%. The tile manufacturing route consisted of dry powder preparation, uniaxial pressing at 50 MPa, and sintering between 1190 and 1250 • C using a fast-firing cycle. The development of the microstructure was followed by XRD and SEM. The technological properties (linear shrinkage, apparent density, water absorption, and flexural strength) as function of the waste addition and firing temperature are investigated. The results revealed that the gradual replacement of Na-feldspar with rock-cutting waste accelerated liquid phase formation and thus sintering, resulting in denser microstructures. All tile pieces consist of mullite and partially dissolved quartz embedded in a glassy matrix. The technological properties were found to be influenced by the waste addition. It was also found that the replacement of Na-feldspar with rock-cutting waste as part of the flux system, in the range up to 47.5 wt.%, allows the production of enhanced floor tiles at lower firing temperatures.
O objetivo do presente trabalho foi avaliar as características mineralógica e físico-químicas do resíduo lodo de ETA do município de Leopoldina, MG, visando seu aproveitamento na indústria de cerâmica vermelha. Foram realizados ensaios de difração de raios X, espectrometria de absorção atômica, fluorescência de raios X, análise térmica (ATD/TG), granulometria, análise morfológica e propriedades plásticas. Os resultados obtidos indicaram que o resíduo lodo de ETA tem potencial para ser incorporado em massas argilosas para a fabricação de cerâmica vermelha
a b s t r a c tIn petroleum extraction industry large amounts of oily sludge have to be discarded. This waste is usually considered of difficult final disposal, causing economical and environmental problems. This work reports on the re-use petroleum waste for manufacturing of red ceramic product used in civil construction. Ceramic pieces containing up to 30 wt.% of petroleum waste were uniaxially pressed and fired at temperatures ranging from 800 • C to 1000 • C. The technological properties (linear shrinkage, water absorption, apparent density, and compressive strength) as function of firing temperature and waste addition are presented. The results showed that the use of up to 30 wt.% of encapsulated petroleum waste into red ceramic pieces is technically adequate and cause less environmental impact.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.