Two versions of a three dimensional multistage Navier-Stokes code were used to optimize the design of an eleven stage high pressure compressor. The first version of the code utilized a “mixing plane” approach to compute the flow through multistage machines. The effects due to tip clearances and flowpath cavities were not modeled. This code was used to minimize the regions of separation on airfoil and endwall surfaces for the compressor. The resulting compressor contained bowed stators and rotor airfoils with contoured endwalls. Experimental data acquired for the HPC showed that it achieved 2% higher efficiency than a baseline machine, but it had 14% lower stall margin. Increased stall margin of the HPC was achieved by modifying the stator airfoils without compromising the gain in efficiency as demonstrated in subsequent rig and engine tests. The modifications to the stators were defined by using the second version of the multistage Navier-Stokes code, which models the effects of tip clearance and endwall flowpath cavities, as well as the effects of adjacent airfoil rows through the use of “bodyforces” and “deterministic stresses”. The application of the Navier-Stokes code was assessed to yield up to 50% reduction in the compressor development time and cost.
A fan performance analysis method based upon three-dimensional steady Navier–Stokes equations is presented in this paper. Its accuracy is established through extensive code validation effort. Validation data comparisons ranging from a two-dimensional compressor cascade to three-dimensional fans are shown in this paper to highlight the accuracy and reliability of the code. The overall fan design procedure using this code is then presented. Typical results of this design process are shown for a current engine fan design. This new design method introduces a major improvement over the conventional design methods based on inviscid flow and boundary layer concepts. Using the Navier–Stokes design method, fan designers can confidently refine their designs prior to rig testing. This results in reduced rig testing and cost savings as the bulk of the iteration between design and experimental verification is transferred to an iteration between design and computational verification.
A fan performance analysis method based upon 3D steady Navier-Stokes equations is presented in this paper. Its accuracy is established through extensive code validation effort. Validation data comparisons ranging from a 2D compressor cascade to 3D fans are shown in this paper to highlight the accuracy and reliability of the code. The overall fan design procedure using this code is then presented. Typical results of this design process are shown for a current engine fan design. This new design method introduces a major improvement over the conventional design methods based on inviscid flow and boundary layer concepts. Using the Navier-Stokes design method, fan designers can confidently refine their designs prior to rig testing. This results in reduced rig testing and cost savings as the bulk of the iteration between design and experimental verification is transferred to an iteration between design and computational verification.
Two versions of a three-dimensional multistage Navier–Stokes code were used to optimize the design of an eleven-stage high-pressure compressor. The first version of the code utilized a “mixing plane” approach to compute the flow through multistage machines. The effects due to tip clearances and flowpath cavities were not modeled. This code was used to minimize the regions of separation on airfoil and endwall surfaces for the compressor. The resulting compressor contained bowed stators and rotor airfoils with contoured endwalls. Experimental data acquired for the HPC showed that it achieved 2 percent higher efficiency than a baseline machine, but it had 14 percent lower stall margin. Increased stall margin of the HPC was achieved by modifying the stator airfoils without compromising the gain in efficiency as demonstrated in subsequent rig and engine tests. The modifications to the stators were defined by using the second version of the multistage Navier–Stokes code, which models the effects of tip clearance and endwall flowpath cavities, as well as the effects of adjacent airfoil rows through the use of “bodyforces” and “deterministic stresses.” The application of the Navier–Stokes code was assessed to yield up to 50 percent reduction in the compressor development time and cost.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.