Networks of fiber Bragg grating (FBG) sensors can serve as structural health monitoring systems for large-scale structures based on the collection of ultrasonic waves. The demodulation of structural Lamb waves using FBG sensors requires a high signal-to-noise ratio because the Lamb waves are of low amplitudes. This paper compares the signal transfer amplitudes between two adhesive mounting configurations for an FBG to detect Lamb waves propagating in an aluminum plate: a directly bonded FBG and a remotely bonded FBG. In the directly bonded FBG case, the Lamb waves create in-plane and out-of-plane displacements, which are transferred through the adhesive bond and detected by the FBG sensor. In the remotely bonded FBG case, the Lamb waves are converted into longitudinal and flexural traveling waves in the optical fiber at the adhesive bond, which propagate through the optical fiber and are detected by the FBG sensor. A theoretical prediction of overall signal attenuation also is performed, which is the combination of material attenuation in the plate and optical fiber and attenuation due to wave spreading in the plate. The experimental results demonstrate that remote bonding of the FBG significantly increases the signal amplitude measured by the FBG.
Record-breaking ultralow density aluminum oxide structures are prepared using a novel templating technique. The alumina structures are unique in that they are comprised by highly aligned and interconnected nanotubes yielding anisotropic behavior. Large-scale network structures with complex form-factors can easily be made using this technique. The application of the low density networks as humidity sensing materials as well as thermal insulation is demonstrated.
Fiber Bragg grating (FBG) sensors are typically bonded on the surface of a structure using an adhesive to collect ultrasonic waves for damage detection in structural health monitoring applications. However, the ultrasonic wave transfer from structure to optical fiber suffers signal attenuation due to the adhesive bond layer, which has a significantly different acoustic impedance than the optical fiber. Therefore, this paper develops a systematic procedure to fabricate an aligned carbon nanotube (CNT)-wrapped FBGs for acoustic impedance matching. Specifically, we first develop an automated CNT winding system to fabricate CNT-wrapped FBGs with varying CNT layer thickness, which are bonded to an aluminum plate for ultrasonic sensitivity testing. We demonstrate that CNT wrapped FBGs do not necessarily produce an increased sensitivity as compared to a reference polyimide-coated FBG, however some outliers are observed with a significant improvement. Using a scanning electron microscopy we examine the cross-section of CNT/adhesive layers, identifying a unique CNT/ adhesive bonding morphology with a stiff exterior shell and a relatively compliant inner layer. Finite element simulation validates that this two-layered bonding geometry is most likely the source of the increased FBG ultrasonic sensitivity for the outliers.
On page 2432, a novel templating process for the creation of ultralow density metal oxide nanostructures is demonstrated by P. D. Bradford, and co‐workers. The alumina structures are unique in that they are comprised of highly aligned and interconnected nanotubes yielding anisotropic behavior. Large‐scale network structures with complex form‐factors can easily be made using this technique. Application of the low density networks as humidity sensing materials as well as thermal insulation is demonstrated.
Networks of fiber Bragg grating (FBG) sensors can serve as structural health monitoring (SHM) systems for large-scale structures based on the collection of ultrasonic waves. The demodulation of structural Lamb waves requires a high signal-to-noise ratio because Lamb waves have a low amplitude. This paper investigates the signal transfer between Lamb waves propagating in an aluminum plate collected by an optical fiber containing a FBG. The fiber is bonded to the plate at locations away from the FBG. The Lamb waves are converted into longitudinal and flexural traveling waves propagating along the optical fiber, which are then transmitted to the Bragg grating. The signal wave amplitude is measured for different distances between the bond location and the Bragg grating. Bonding the optical fiber away from the FBG location and closer to the signal source produces a significant increase in signal amplitude, here measured to be 5.1 times that of bonding the Bragg grating itself. The arrival time of the different measured wave coupling paths are also calculated theoretically, verifying the source of the measured signals. The effect of the bond length to Lamb wavelength ratio is investigated, showing a peak response as the bond length is reduced compared to the wavelength. This study demonstrates that coupling Lamb waves into guided traveling waves in an optical fiber away from the FBG increases the signal-to-noise ratio of Lamb wave detection, as compared to direct transfer of the Lamb wave to the optical fiber at the location of the FBG.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.