Optical traps have become widespread tools for studying biological objects on the micro and nanoscale. However, conventional laser tweezers and traps rely on bulk optics and are not compatible with current trends in optofluidic miniaturization. Here, we report a new type of particle trap that relies on propagation loss in confined modes in liquid-core optical waveguides to trap particles. Using silica beads and E. coli bacteria, we demonstrate unique key capabilities of this trap. These include single particle trapping with micron-scale accuracy at arbitrary positions over waveguide lengths of several millimeters, definition of multiple independent particle traps in a single waveguide, and combination of optical trapping with single particle fluorescence analysis. The exclusive use of a two-dimensional network of planar waveguides strongly reduces experimental complexity and defines a new paradigm for on-chip particle control and analysis.
The development of on-chip methods to manipulate particles is receiving rapidly increasing attention. All-optical traps offer numerous advantages, but are plagued by large required power levels on the order of hundreds of milliwatts and the inability to act exclusively on individual particles. Here, we demonstrate a fully integrated electro-optical trap for single particles with optical excitation power levels that are five orders of magnitude lower than in conventional optical force traps. The trap is based on spatio-temporal light modulation that is implemented using networks of antiresonant reflecting optical waveguides. We demonstrate the combination of on-chip trapping and fluorescence detection of single microorganisms by studying the photobleaching dynamics of stained DNA in E. coli bacteria. The favorable size scaling facilitates the trapping of single nanoparticles on integrated optofluidic chips.
This study focused on the performance of commercial AlGaN/InGaN/GaN blue light emitting diodes ͑LEDs͒ under high current pulse conditions. The results of deep level transient spectroscopy ͑DLTS͒, thermally stimulated capacitance, and admittance spectroscopy measurements performed on stressed devices, showed no evidence of any deep-level defects that may have developed as a result of high current pulses. Physical analysis of stressed LEDs indicated a strong connection between the high intrinsic defect density in these devices and the resulting mode of degradation.
Spectral filtering is an essential component of biophotonic methods such as fluorescence and Raman spectroscopy. Predominantly utilized in bulk microscopy, filters require efficient and selective transmission or removal of signals at one or more wavelength bands. However, towards highly sensitive and fully self-contained lab-on-chip systems, the integration of spectral filters is an essential step. In this work, a novel optofluidic solution is presented in which a liquid-core optical waveguide both transports sample analytes and acts as an efficient filter for advanced spectroscopy. To this end, the wavelength dependent nature of interference-based antiresonant reflecting optical waveguide technology is exploited. An extinction of 37 dB, a narrow rejection band of only 2.5 nm and a free spectral range of 76 nm using three specifically designed dielectric layers are demonstrated. These parameters result in an 18.4-fold increase in the signal-to-noise ratio for on-chip fluorescence detection. In addition, liquid-core waveguide filters with three operating wavelengths were designed for Forster resonance energy transfer detection and demonstrated using doubly labeled oligonucleotides. Incorporation of high-performance spectral processing illustrates the power of the optofluidic concept where fluidic channels also perform optical functions to create innovative and highly integrated lab-on-chip devices.
Optical sensing platforms based on anti-resonant reflecting optical waveguides (ARROWs) with hollow cores have been used for bioanalysis and atomic spectroscopy. These integrated platforms require that hollow waveguides interface with standard solid waveguides on the substrate to couple light into and out of test media. Previous designs required light at these interfaces to pass through the anti-resonant layers. We present a new ARROW design which coats the top and sides of the hollow core with only SiO 2 , allowing for high interface transmission between solid and hollow waveguides. The improvement in interface transmission with this design is demonstrated experimentally and increases from 35% to 79%. Given these parameters, higher optical throughputs are possible using single SiO 2 coatings when hollow waveguides are shorter than 5.8 mm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.