A phase-locked frequency comb in the near infrared is demonstrated with a mode-locked, erbium-doped, fiber laser whose output is amplified and spectrally broadened in dispersion-flattened, highly nonlinear optical fiber to span from 1100 to >2200 nm. The supercontinuum output comprises a frequency comb with a spacing set by the laser repetition rate and an offset by the carrier-envelope offset frequency, which is detected with the standard f-to-2f heterodyne technique. The comb spacing and offset frequency are phase locked to a stable rf signal with a fiber stretcher in the laser cavity and by control of the pump laser power, respectively. This infrared comb permits frequency metrology experiments in the near infrared in a compact, fiber-laser-based system.

Supercontinua generated by femtosecond pulses launched in microstructure fiber can exhibit significant low-frequency (<1-MHz) amplitude noise on the output pulse train. We show that this low-frequency noise is an amplified version of the amplitude noise that is already present on the input laser pulse train. Through both experimental measurements and numerical simulations, we quantify the noise amplification factor and its dependence on the supercontinuum wavelength and on the energy and duration of the input pulse. Interestingly, the dependence differs significantly from that of the broadband white-noise component, which arises from amplification of the input laser shot noise.

No abstract

The frequency comb from a mode-locked fiber laser can be stabilized through feedback to the pump power. An understanding of the mechanisms and bandwidth governing this feedback is of practical importance for frequency comb design and of basic interest since it provides insight into the rich nonlinear laser dynamics. We compare experimental measurements of the response of a fiber-laser frequency comb to theory. The laser response to a pump-power change follows that of a simple low-pass filter with a time constant set by the gain relaxation time and the system-dependent nonlinear loss. Five different effects contribute to the magnitude of the response of the frequency comb spacing and offset frequency but the dominant effects are from the resonant contribution to the group velocity and intensity-dependent spectral shifts. The origins of the intensity-dependent spectral shifts are explained in terms of the laser parameters.

We demonstrate near-transform-limited pulse generation through spectral compression arising from nonlinear propagation of negatively chirped pulses in optical fiber. The output pulse intensity and phase were quantified by use of second-harmonic generation frequency-resolved optical gating. Spectral compression from 8.4 to 2.4 nm was obtained. Furthermore, the phase of the spectrally compressed pulse was found to be constant over the spectral and temporal envelopes, which is indicative of a transform-limited pulse. Good agreement was found between the experimental results and numerical pulse-propagation studies.