Background: The acromioclavicular (AC) capsule and ligament have been found to play a major role in maintaining horizontal stability. To reconstruct the AC capsule and ligament, precise knowledge of their anatomy is essential. Purpose/Hypothesis: The purposes of this study were (1) to determine the angle of the posterosuperior ligament in regard to the axis of the clavicle, (2) to determine the width of the attachment (footprint) of the AC capsule and ligament on the acromion and clavicle, (3) to determine the distance to the AC capsule from the cartilage border of the acromion and clavicle, and (4) to develop a clockface model of the insertion of the posterosuperior ligament on the acromion and clavicle. It was hypothesized that consistent angles, attachment areas, distances, and insertion sites would be identified. Study Design: Descriptive laboratory study. Methods: A total of 12 fresh-frozen shoulders were used (mean age, 55 years [range, 41-64 years]). All soft tissue was removed, leaving only the AC capsule and ligament intact. After a qualitative inspection, a quantitative assessment was performed. The AC joint was fixed in an anatomic position, and the attachment angle of the posterosuperior ligament was measured using a digital protractor. The capsule and ligament were removed, and a coordinate measuring device was utilized to assess the width of the AC capsule footprint and the distance from the footprint to the cartilage border of the acromion and clavicle. The AC joint was then disarticulated, and the previously marked posterosuperior ligament insertion was transferred into a clockface model. The mean values across the 12 specimens were demonstrated with 95% CIs. Results: The mean attachment angle of the posterosuperior ligament was 51.4° (95% CI, 45.2°-57.6°) in relation to the long axis of the entire clavicle and 41.5° (95% CI, 33.8°-49.1°) in relation to the long axis of the distal third of the clavicle. The mean clavicular footprint width of the AC capsule was 6.4 mm (95% CI, 5.8-6.9 mm) at the superior clavicle and 4.4 mm (95% CI, 3.9-4.8 mm) at the inferior clavicle. The mean acromial footprint width of the AC capsule was 4.6 mm (95% CI, 4.2-4.9 mm) at the superior side and 4.0 mm (95% CI, 3.6-4.4 mm) at the inferior side. The mean distance from the lateral clavicular attachment of the AC capsule to the clavicular cartilage border was 4.3 mm (95% CI, 4.0-4.6 mm), and the mean distance from the medial acromial attachment of the AC capsule to the acromial cartilage border was 3.1 mm (95% CI, 2.9-3.4 mm). On the clockface model of the right shoulder, the clavicular attachment of the posterosuperior ligament ranged from the 9:05 (range, 8:00-9:30) to 11:20 (range, 10:00-12:30) position, and the acromial attachment ranged from the 12:20 (range, 11:00-1:30) to 2:10 (range, 13:30-14:40) position. Conclusion: The finding that the posterosuperior ligament did not course perpendicular to the AC joint but rather was oriented obliquely to the long axis of the clavicle, in combination with the newly developed clockface model, may help surgeons to optimally reconstruct this ligament. Clinical Relevance: Our results of a narrow inferior footprint and a short distance from the inferior AC capsule to cartilage suggest that proposed reconstruction of the AC joint capsule should focus primarily on its superior portion.

No abstract

Background: Meniscal deficiency has been reported to increase contact pressures in the affected tibiofemoral joint, possibly leading to degenerative changes. Current surgical options include meniscal allograft transplantation and insertion of segmental meniscal scaffolds. Little is known about segmental meniscal allograft transplantation. Purpose: To evaluate the effectiveness of segmental medial meniscal allograft transplantation in the setting of partial medial meniscectomy in restoring native knee loading characteristics. Study Design: Controlled laboratory study. Methods: Ten fresh-frozen human cadaveric knees underwent central midbody medial meniscectomy and subsequent segmental medial meniscal allograft transplantation. Knees were loaded in a dynamic tensile testing machine to 1000 N for 20 seconds at 0°, 30°, 60°, and 90° of flexion. Four conditions were tested: (1) intact medial meniscus, (2) deficient medial meniscus, (3) segmental medial meniscal transplant fixed with 7 meniscocapsular sutures, and (4) segmental medial meniscal transplant fixed with 7 meniscocapsular sutures and 1 suture fixed through 2 bone tunnels. Submeniscal medial and lateral pressure-mapping sensors assessed mean contact pressure, peak contact pressure, mean contact area, and pressure mapping. Two-factor random-intercepts linear mixed effects models compared pressure and contact area measurements among experimental conditions. Results: The meniscal-deficient state demonstrated a significantly higher mean contact pressure than all other testing conditions (mean difference, ≥0.35 MPa; P < .001 for all comparisons) and a significantly smaller total contact area as compared with all other testing conditions (mean difference, ≤140 mm2; P < .001 for all comparisons). There were no significant differences in mean contact pressure or total contact area among the intact, transplant, or transplant-with-tunnel groups or in any outcome measure across all comparisons in the lateral compartment. No significant differences existed in center of pressure and relative pressure distribution across testing conditions. Conclusion: Segmental medial meniscal allograft transplantation restored the medial compartment mean contact pressure and mean contact area to values measured in the intact medial compartment. Clinical Relevance: Segmental medial meniscal transplantation may provide an alternative to full meniscal transplantation by addressing only the deficient portion of the meniscus with transplanted tissue. Additional work is required to validate long-term fixation strength and biologic integration.

Background: While the glenoid track concept presents a useful prediction for recurrent glenohumeral instability, little is known about the humeral head bony architecture as it relates to glenoid erosion in the setting of bipolar bone loss. Purpose: To (1) qualitatively and quantitatively analyze the interplay between glenoid bone loss (GBL) and Hill-Sachs lesions (HSLs) in a cohort of patients with anterior instability using 3-dimensional imaging software and (2) assess the relationships between GBL and HSL characteristics. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Patients were identified who had anterior shoulder instability with a minimum 5% GBL and evidence of HSL confirmed on computed tomography. Unilateral 3-dimensional models of the ipsilateral proximal humeral head and en face sagittal oblique view of the glenoid were reconstructed using MIMICS software (Materialise NV). GBL surface area, width, defect length, and glenoid track width were quantified. The volume, surface area, width, and depth of identified HSLs were quantified with their location (medial, superior, and inferior extent) on the humeral head. Severity of GBL was defined as percentage glenoid bone surface area loss and categorized as low grade (5%-10%), moderate grade (>10% to 20%), high grade (>20% to 30%), and extensive (>30%). Analysis of variance was then computed to determine significance ( P < .05) between severity of GBL and associated HSL parameters. Results: In total, 100 patients met inclusion criteria (mean age, 27.9 years; range, 18-43 years), which included 58 right shoulders and 42 left shoulders (84 male, 16 female). Among groups, there were 32 patients with low-grade GBL (mean GBL = 6.1%), 38 with moderate grade (μ GBL = 16.2%), 17 with high grade (μ GBL = 23.7%), and 13 with extensive (μ GBL = 34.0%), with an overall mean GBL of 18.1% (range, 5%-39%). Patients with 5%-10% GBL had significantly narrower HSLs (average and maximum width; P < .03) and deeper HSLs (average depth; P = .002) as compared with all other GBL groups, while greater GBL was associated with wider and shallower HSLs. GBL width, percentage width loss, defect length, and glenoid track width all significantly differed across the 4 GBL groups ( P < .05). Conclusion: HSLs had significantly different morphological characteristics depending on the severity of GBL, indicating that GBL was directly related to the characteristics of HSLs. Patients presenting with smaller glenoid defects had significantly narrower and deeper HSLs with less humeral head surface area loss, while greater GBL was associated with wider and shallower HSLs.

Objective The purpose of this work was to compare measurements of talar cartilage thickness and cartilage and bone surface geometry from clinically feasible magnetic resonance imaging (MRI) against high-accuracy laser scan models. Measurement of talar bone and cartilage geometry from MRI would provide useful information for evaluating cartilage changes, selecting osteochondral graft sources or creating patient-specific joint models. Design Three-dimensional (3D) bone and cartilage models of 7 cadaver tali were created using (1) manual segmentation of high-resolution volumetric sequence 3T MR images and (2) laser scans. Talar cartilage thickness was compared between the laser scan– and MRI-based models for the dorsal, medial, and lateral surfaces. The laser scan– and MRI-based cartilage and bone surface models were compared using model-to-model distance. Results Average cartilage thickness within the dorsal, medial, and lateral surfaces were 0.89 to 1.05 mm measured with laser scanning, and 1.10 to 1.22 mm measured with MRI. MRI-based thickness was 0.16 to 0.32 mm higher on average in each region. The average absolute surface-to-surface differences between laser scan– and MRI-based bone and cartilage models ranged from 0.16 to 0.22 mm for bone (MRI bone models smaller than laser scan models) and 0.35 to 0.38 mm for cartilage (MRI bone models larger than laser scan models). Conclusions This study demonstrated that cartilage and bone 3D modeling and measurement of average cartilage thickness on the dorsal, medial, and lateral talar surfaces using MRI were feasible and provided similar model geometry and thickness values to ground-truth laser scan–based measurements.