SUMMARYIn this two-part paper we present a collection of numerical methods combined into a single framework, which has the potential for a successful application to wind turbine rotor modeling and simulation. In Part 1 of this paper we focus on: 1. The basics of geometry modeling and analysis-suitable geometry construction for wind turbine rotors; 2. The fluid mechanics formulation and its suitability and accuracy for rotating turbulent flows; 3. The coupling of air flow and a rotating rigid body. In Part 2 we focus on the structural discretization for wind turbine blades and the details of the fluid-structure interaction computational procedures. The methods developed are applied to the simulation of the NREL 5MW offshore baseline wind turbine rotor. The simulations are performed at realistic wind velocity and rotor speed conditions and at full spatial scale. Validation against published data is presented and possibilities of the newly developed computational framework are illustrated on several examples.
We present the special space-time computational techniques we have introduced recently for computation of flow problems with moving and deforming solid surfaces. The techniques have been designed in the context of the deforming-spatial-domain/stabilized space-time formulation, which was developed by the Team for Advanced Flow Simulation and Modeling for computation of flow problems with moving boundaries and interfaces. The special space-time techniques are based on using, in the space-time flow computations, non-uniform rational B-splines (NURBS) basis functions for the temporal representation of the motion and deformation of the solid surfaces and also for the motion and deformation of the volume meshes computed. This provides a better temporal representation of the solid surfaces and a more effective way of handling the volume-mesh motion. We apply these techniques to computation of the aerodynamics of flapping wings, specifically locust wings, where the prescribed motion and deformation of the wings are based on digital data extracted from the videos of the locust in a wind tunnel. We report results from the preliminary computations.
We show how we use the Deforming-SpatialDomain/Stabilized Space-Time (DSD/SST) formulation for accurate 3D computation of the aerodynamics of a windturbine rotor. As the test case, we use the NREL 5MW offshore baseline wind-turbine rotor. This class of computational problems are rather challenging, because they involve large Reynolds numbers and rotating turbulent flows, and computing the correct torque requires an accurate and meticulous numerical approach. We compute the problem with both the original version of the DSD/SST formulation and a recently introduced version with an advanced turbulence model. The DSD/SST formulation with the advanced turbulence model is a space-time version of the residual-based variational multiscale method. We compare our results to those reported recently, which were obtained with the residualbased variational multiscale Arbitrary Lagrangian-Eulerian method using NURBS for spatial discretization and which we take as the reference solution. While the original DSD/SST formulation yields torque values not far from the reference solution, the DSD/SST formulation with the variational multiscale turbulence model yields torque values very close to the reference solution.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.