The separation properties of polyamide reverse osmosis and nanofiltration membranes, widely applied for desalination and water reuse, are constrained by the permeability-selectivity upper bound. Although thin-film nanocomposite (TFN) membranes incorporating nanomaterials exhibit enhanced water permeance, their rejection is only moderately improved or even impaired due to agglomeration of nanomaterials and formation of defects. A novel type of TFN membranes featuring an interlayer of nanomaterials (TFNi) has emerged in recent years. These novel TFNi membranes show extraordinary improvement in water flux (e.g., up to an order of magnitude enhancement) along with better selectivity. Such enhancements can be achieved by a wide selection of nanomaterials, ranging from nanoparticles, one-/two-dimensional materials, to interfacial coatings. The use of nanostructured interlayers not only improves the formation of polyamide rejection layers but also provides an optimized water transport path, which enables TFNi membranes to potentially overcome the longstanding trade-off between membrane permeability and selectivity. Furthermore, TFNi membranes can potentially enhance the removal of heavy metals and micropollutants, which is critical for many environmental applications. This review critically examines the recent developments of TFNi membranes and discusses the underlying mechanisms and design criteria. Their potential environmental applications are also highlighted.

Transport of water, solutes, and contaminants through a thin film composite (TFC) membrane is governed by the intrinsic structure of its polyamide separation layer. In this work, we systematically characterized the nanoscale polyamide structure of four commercial TFC membranes to reveal the underlying structure–property relationship. For all the membranes, their polyamide layers have an intrinsic thickness in the range of 10–20 nm, which is an order of magnitude smaller than the more frequently reported apparent thickness of the roughness protuberances due to the ubiquitous presence of nanovoids within the rejection layers. Tracer filtration tests confirmed that these nanovoids are well connected to the pores in the substrates via the honeycomb-like opening of the backside of the polyamide layers such that the actual separation takes place at the frontside of the polyamide layer. Compared to SW30HR and BW30, loose membranes XLE and NF90 have thinner intrinsic thickness and greater effective filtration area (e.g., by the creation of secondary roughness features) for their polyamide layers, which correlates well to their significantly higher water permeability and lower salt rejection. With the aid of scanning electron microscopy, transmission electron microscopy, and tracer tests, the current study reveals the presence of nanosized defects in a polyamide film, which is possibly promoted by excessive interfacial degassing. The presence of such defects not only impairs the salt rejection but also has major implications for the removal of pathogens and micropollutants.

No abstract