Abstract:Our study aims to implement a strategy to reduce the carbon steel corrosion rate in a sulfuric acid solution, using an expired drug with adsorption affinity on the metal surface. To investigate the corrosion protection efficiency of an environmental friendly inhibitor, namely neomycin sulfate (NMS), the electrochemical measurements were applied on carbon steel immersed in 1.0 M H 2 SO 4 solution with and without NMS. The protective layer that formed on the steel surface was studied by atomic force microscopy (AFM). The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) showed that the presence of the neomycin sulfate in acid solution leads to the decrease in corrosion current density (i corr ) and the increase of polarization resistance (R p ). The mixed mechanism between physical and chemical adsorption of NMS molecules on the steel surface was proposed according to the Langmuir adsorption isotherm. AFM indicated that the NMS molecules contributed to a protective layer formation by their adsorption on the steel surface. The AFM parameters, such as root mean square roughness (R q ), average roughness (R a ), and maximum peak to valley height (R p−v ) revealed that in the presence of NMS a smoother surface of carbon steel was obtained, compared to the steel surface corroded in sulfuric acid blank solution.

No abstract

No abstract

The poly‐hematoxylin films undoped (p‐HX) and doped with strontium (p‐HX‐Sr) were prepared on the platinum electrodes (Pt) using cyclic voltammetry. The influence of experimental parameters, such as: anodic potential and number of voltammetric cycles on the films synthesis was investigated by electrochemical impedance spectroscopy (EIS). The results showed that, the optimal conditions to obtain the poly‐hematoxylin films on platinum electrode from 10−2 mol L−1 NaNO3 solution, were found by recording 10 voltammetric cycles at an anodic potential of 1.5 V. Electrocatalytic activity of the poly‐hematoxylin‐platinum (p‐HX/Pt) and poly‐hematoxylin‐strontium‐platinum (p‐HX‐Sr/Pt) electrodes was tested for electrochemical degradation of benzocaine using UV‐Vis spectrophotometry. Both, the mechanisms of hematoxylin (HX) polymerization, as well as benzocaine degradation were proposed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Electrochemical degradation of such dyes as methylene blue (BM-ylene) and methyl blue (BM-yl) was investigated using UV-Vis spectrophotometry, in order to be removed from the solutions, leading to discoloration of wastewater obtained under simulated laboratory conditions. The electrochemical degradation in the presence of 2 4 SO  ions, as well as in the presence of Clions were compared for the synthetic waters containing BM-ylene and BM-yl. The results showed that the fastest degradation and discoloration of the BM-yl solution containing Clions was achieved, with a high value for its color removal (CR) of 89.7% obtained after 10 min.

Quinine sulfate dihydrate (QNS), IUPAC name: (8S,9R)-6-methoxy-4-quinolenyl-5-vinyl-2-quinuclidinyl methanol sulfate dihydrate, was tested as corrosion inhibitor for carbon steel in 1.5 mol L−1 HCl solution using the potentiodynamic polarization and the electrochemical impedance spectroscopy (EIS) associated with UV-Vis spectrophotometry. The electrochemical results showed that, the inhibition efficiency (IE) increased with the increase in QNS concentration, reaching a maximum value of 93.35±0.25%. The polarization resistance (R p) followed the same trend, obtaining the highest value of 659.7 Ω cm2, while the corrosion current density (i corr) reached the lowest level of 195 µA cm−2. The action mechanism of QNS was proposed considering the ability of quinine (QN) to be adsorbed on the metal surface via the lone pairs of electrons from hydroxyl oxygen atom, and/or from quinoline and quinuclidinic nitrogens. The occurrence of the complexes between inhibitor and iron ions was considered an additional process, which may contribute to protective layer formation. The Temkin adsorption isotherm was found as the best fitting for the degree of surface coverage (θ) values. In order to elucidate the mechanism of protective layer formation, the free energy of adsorption (ΔG o ads) value was calculated. This indicates that the inhibitor acts by chemical adsorption on the steel surface.

No abstract

15Our study aims to implement a strategy to reduce the carbon steel corrosion rate in sulfuric acid