Purpose This paper aims to present the design and experiment of a modular multisensory prosthetic hand for applications. Design and experiment of a modular multisensory hand for prosthetic applications. Design/methodology/approach This paper reveals more details focusing on the appearance, mechanism design, electrical design and control of the prosthetic hand considering anthropomorphism, dexterity, sensing and controllability. The finger is internally integrated with the actuator, the transmission mechanism, the sensors and the controller as a modular unit. Integrated with multiple sensors, the prosthetic hand can not only perceive the position, the contact force and the temperature of the environment like a human hand but also provide the foundation for the practical control. Findings The experiments show that the prosthetic hand can accurately control the contact force to achieve stable grasps based on the sensors feedback and a simple and effective force-tracking impedance control algorithm. In addition, the experiments based on the cosmesis validate not only the cosmesis functionality but also the control performance for a prosthesis–cosmesis system. Practical implications Because of the small size, low weight, high integration, modularity and controllability, the prosthetic hand is easily applied to upper-limb amputees. Meanwhile, the finger as a modular unit is easy to be fixed, maintained and applied to a partial upper-limb amputee. Originality/value Each modular finger of the prosthetic hand integrated with the actuator, the transmission mechanism, the sensors and the controller as a whole can independently control the position and the force. The cosmetic glove design can provide pretty appearance without compromising the control performance.
No abstract
Purpose – This paper presents a method to elaborate the selections of these parameters to achieve stable grasps. The performance of a prosthetic hand is mainly determined by its mechanical design. However, the effects of the geometric parameters of the hand configuration and the object sizes on the grasp stability are unknown. Design/methodology/approach – First, the thumb functions of human hands are analyzed based on the anatomical model, and the configuration characteristics of the thumbs for typical prosthetic hands are summarized. Then a method of optimizing the thumb configuration is proposed by measuring the kinematic transmission performance of robotics. On the basis of the thumb configuration analysis, a design method of the prosthetic hand configuration is proposed based on form closure theory. The discriminant function of form closure is used to analyze and determine the hand configuration parameters. Findings – An application of this method – the newly developed HIT V prosthetic hand – elaborates the optimization of the thumb configuration and the hand configuration, where the relation between the key hand configuration parameters and the discriminant function on condition of satisfying form closure, sustained by analytical equations and graphs, is revealed and visualized. An experimental verification shows that it is an effective method to design the prosthetic hand configuration available for grasping typical objects in our daily life. Originality/value – The paper shows how to easily determine the geometric dimensions of the palm, phalanges and hand configuration, so that the desired range of object sizes can be obtained.
This paper is the first in the two-part series quantitatively modelling human grasp functionality and understanding the way human grasp objects. The aim is to investigate the thumb movement behavior influenced by object shapes, sizes, and relative positions. Ten subjects were requested to grasp six objects ( 3 shapes × 2 sizes ) in 27 different relative positions ( 3 X deviation × 3 Y deviation × 3 Z deviation ). Thumb postures were investigated to each specific joint. The relative position ( X , Y , and Z deviation) significantly affects thumb opposition rotation (Rot) and flexion (interphalangeal (IP) and metacarpo-phalangeal (MCP)), while the object property (object shape and size) significantly affects thumb abduction/adduction (ABD) motion. Based on the F value, the Y deviation has the primary effects on thumb motion. When the Y deviation changing from proximal to distal, thumb opposition rotation (Rot) and flexion (IP and MCP joint) angles were increased and decreased, respectively. For principal component analysis (PCA) results, thumb grasp behavior can be accurately reconstructed by first two principal components (PCs) which variance explanation ratio reached 93.8% and described by the inverse and homodromous coordination movement between thumb opposition and IP flexion. This paper provides a more comprehensive understanding of thumb grasp behavior. The postural synergies can reproduce the anthropomorphic motion, reduce the robot hardware, and control dimensionality. All of these provide a more accurate and general basis for the design and control of the bionic thumb and novel wearable assistant robot, thumb function assessment, and rehabilitation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.