To extend understanding of the bonding behavior of fiber reinforced polymer (FRP) and steel bars in self-compacting concrete (SCC), an experimental series consisting of 36 direct pull-out tests monitored by acoustic emission (AE) were performed in this paper. The test variables involved rebar type, bar diameter, embedded length, and polypropylene (PP) fiber volume content. For each test, the pull-out force and free end slip were continuously measured and compared with the corresponding AE signals. It was found that the proposed AE method was effective in detecting the debonding process between the FRP/steel bars and the hosting concrete. The AE signal strength exhibited a good correlation with the actual bond stress-slip relationship measured in each specimen. Based on the AE location technique, the invisible non-uniform distribution of bonding stress along the bar was further revealed, the initial location of damage and the debonding process were captured. Additionally, the contribution of bar-to-concrete load-bearing mechanism (chemical adhesion, friction, and mechanical interlocking) to sustain the pull-out force was effectively clarified by studying the collected signals in the frequency domain of AE methods. The experimental results demonstrate that the proposed AE method has potential to detect the debonding damage of FRP/steel bar reinforced SCC structures accurately.
The shear strength prediction of concrete beams reinforced with FRP rebars and stirrups is one of the most complicated issues in structural engineering applications. Numerous experimental and theoretical studies have been conducted to establish a relationship between the shear capacity and the design variables. However, existing semi-empirical models fail to deliver precise predictions due to the intricate nature of shear mechanisms. To provide a more accurate and reliable model, machine learning (ML) techniques are adopted to study the shear behavior of concrete beams reinforced with FRP rebars and stirrups. A database consisting of 120 tested specimens is compiled from the reported literature. An artificial neural network (ANN) and a combination of ANN with a genetic optimization algorithm (GA-ANN) are implemented for the development of an ML model. Through neural interpretation diagrams (NID), the critical design factors, i.e., beam width and effective depth, shear span-to-depth ratio, compressive strength of concrete, FRP longitudinal reinforcement ratio, FRP shear reinforcement ratio, and elastic modulus of FRP longitudinal reinforcement rebars and FRP stirrups, are identified and determined as input parameters of the models. The accuracy of the proposed models has been verified by comparing the model predictions with the available test results. The application of the GA-ANN model provides better statistical results (mean value Vexp/Vpre equal to 0.99, R2 of 0.91, and RMSE of 22.6 kN) and outperforms CSA S806-12 predictions by improving the R2 value by 18.2% and the RMSE value by 52.5%. Furthermore, special attention is paid to the coupling effects of design parameters on shear capacity, which has not been reasonably considered in the models in the literature and available design guidelines. Finally, an ML-regression equation considering the coupling effects is developed based on the data-driven regression analysis method. The analytical results revealed that the prediction agrees with the test results with reasonable accuracy, and the model can be effectively applied in the prediction of shear capacity of concrete beams reinforced with FRP bars and stirrups.
This study investigated the shear resistance and damage evolution of glass fiber-reinforced polymer (GFRP)-reinforced concrete short columns. Five circular concrete short columns reinforced with GFRP bars and spiral stirrups were fabricated and tested under lateral thrust in the laboratory. The test variables involved the stirrup reinforcement ratio, the longitudinal reinforcement ratio and the type of stirrups. The failure modes, load-displacement curves, strain responses and crack characteristics of these columns were documented and discussed. The accuracy of shear design equations in predicting shear capacity of such columns was evaluated. In addition, the digital image correlation (DIC) instrument was used to identify the full-field strain and damage zones of circular concrete short columns. Several smart aggregate (SA) transducers coupled to the surface of these columns were used to monitor its damage status. The energy ratio index (ERI) and the damage index based on smart aggregate were established to characterize damage level of such columns. The test results indicate that the shear capacity is improved 5.6% and 31.1% and the lateral ultimate displacement is increased 67.7% and 400% as the stirrup reinforcement ratio of the concrete short column is increased from 0 to 0.19% and 0.47%, respectively. The shear capacity equation proposed by Ali and his co-workers, considering a strain limit of , gives accurate predictions of the shear capacity of circular concrete short columns reinforced with GFRP bars and spiral stirrups. The variation in ERI values is explained by the development of damage zones of the column obtained with DIC technology and with the proposed damage index based on the smart aggregate it is feasible to evaluate the damage level of circular short concrete columns.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.