This paper discusses a recent study of mercury catalytic oxidation by chlorinating reagents. Gold was chosen as the catalyst because of its reluctance to chemisorb some gases such as O2, NO, H2O, and SO2. This property, as demonstrated in this study, is instrumental to mercury oxidation by circumventing some undesired inhibitory reactions such as OH + NO + M --> HONO + M and OH + SO2 + M --> HOSO2 + M, which were recognized under homogeneous situations at high temperatures. In comparison to Cl2, HCl showed weak oxidizing capability but appreciable inhibition in mercury oxidation by Cl2, probably through the competition of active sites with Cl2. Overall, the mercury catalytic oxidation by Cl2 on gold catalyst surfaces was viable, reaching 40-60% in this study under temperatures of 448-498 K, where the thermal decomposition of formed Hg2+ was effectively avoided.

The applicability of a gold-plated iridium Nano-Band array ultramicroelectrode (6 microm by 0.2 microm, 64-microm interspacing, 100 electrode bands) in the analysis of mercury using a portable system is demonstrated by anodic stripping voltammetry in real-life samples. Optimized measurement parameters, 0.1 M HCl electrolyte, plating potential of 0 mV, and staircase scan mode were identified. The dynamic linear range is 10-180 ppb at 5-s deposition time with 1.5 microC of gold plated. The experimental detection limit for Hg2+ in 0.1 M HCl was 0.5 ppb at a deposition time of 4 min and a scan rate of 10 V/s. Real-life samples, such as flue gas exposed samples from flue gas simulators could be analyzed within 5 min using the method of standard additions. We identified a field-portable extraction procedure for soil samples using 1:1 concentrated HNO3/30% H2O2 mixture, compatible with ASV and the iridium electrode. The detection limit for soils is 1 ppm. The results obtained using ASV are in good agreement with reference values using cold vapor atomic absorption for the sample matrixes studied here. To our knowledge, this is the first mercury application using a reusable iridium array ultramicroelectrode. The portable potentiostat is less than 500 g, and together with the portable digestion method, makes the Nano-Band Explorer system field applicable.

The souring of oil (increasing concentrations of hydrogen sulfide [H 2 S] gas) from reservoirs in the Bakken Formation has been observed in the field. Souring of oil presents challenges including but not limited to health and environmental risks, corrosion of wellbore, added expense with regard to materials handling and pipeline equipment, and additional refinement requirements. As such, sour oil and gas have lower profit margin (~10% lower price) than traditional sweet Bakken crude.The understanding of causes for souring in the Bakken Formation and its timely identification are essential for determining the best operational practices and mitigation procedures at this formation. This paper will present an outline of the research goals, a current understanding of souring at the Bakken, and initial findings. Over the course of this project, the series of case-oriented uncoupled compositional reservoir simulations were developed to research the most probable mechanism of H 2 S generation in the Bakken Formation. The results of this investigation will be correlated in the future with field data from the Bakken oil field operator and laboratory experiments.

No abstract

No abstract