Peroxidation, epoxidation, and/or perepoxidation reactions of soybean oil under air at room temperature resulted in cross-linked polymeric soybean oil peroxides on the surface along with the waxy soluble part, sPSB, with a molecular weight of 4690, containing up to 2.3 wt % peroxide. This soluble polymeric oil peroxide, sPSB, initiated the free radical polymerization of either methyl methacrylate (MMA) or n-butyl methacrylate (nBMA) to give PSB-g-PMMA and PSB-g-PnBMA graft copolymers. The polymers obtained were characterized by (1)H NMR, thermogravimetric analysis, differential scanning calorimetry, and gel permeation chromatography techniques. Polymeric oil as a plasticizer lowered the glass transition of the PSB-g-PMMA graft copolymers. PSB-g-PMMA and PSB-g-PnBMA graft copolymer film samples were also used in cell culture studies. Fibroblast and macrophage cells were strongly adhered and spread on the copolymer film surfaces, which is important in tissue engineering. Bacterial adhesion on PSB-g-PMMA graft copolymer was also studied. Both Staphylococcus epidermidis and Escherichia coli adhered on the graft copolymer better than on homo-PMMA. Furthermore, the latter adhered much better than the former.
Syntheses of wholly natural polymeric linseed oil (PLO) containing peroxide groups have been reported. Peroxidation, epoxidation and/or perepoxidation reactions of linseed oil, either under air or under oxygen flow at room temperature, resulted in polymeric peroxides, PLO-air and PLO-ofl, containing 1.3 and 3.5 wt.-% of peroxide, with molecular weights of 2 100 and 3 780 Da, respectively. PLO-air contained cross-linked film up to 46.1 wt.-% after a reaction time of 60 d, associated with a waxy, soluble part (PLO-air-s) that was isolated with chloroform extraction. PLO-ofl was obtained as a waxy, viscous liquid without any cross-linked part at the end of 24 d under visible irradiation and oxygen flow. Polymeric peroxides, PLO-air-s and PLO-ofl initiated the free radical polymerization of both methyl methacrylate (MMA) and styrene (S) to give PMMA-graft-PLO and PS-graft-PLO graft copolymers in high yields with Mw varying from 37 to 470 kDa. The polymers obtained were characterized by FT-IR, (1)H NMR, TGA, DSC and GPC techniques. Cross-linked polymers were also studied by means of swelling measurements. PMMA-graft-PLO graft copolymer film samples were also used in cell-culture studies. Fibroblast cells were well adhered and proliferated on the copolymer film surfaces, which is important in tissue engineering.
To diversify edible-oil polymer composite, polymeric linoleic acid (PLina) peroxide was obtained by the auto-oxidation of linoleic acid in a simple way for use as a macroinitiator in free radical polymerization of vinyl monomers. Peroxidation, epoxidation, and/or perepoxidation reactions of linoleic acid under air at room temperature resulted in PLina, having soluble fraction more than 91 weight percent (wt%), with molecular weight ranging from 1,644 to 2,763 Da, and containing up to 1.0 wt% of peroxide. PLina initiated the free radical polymerization of ether styrene (S), methyl methacrylate (MMA), or n-butyl methacrylate (nBMA) to give PLina-g-polystyrene (PS), PLina-g-poly-MMA (PMMA), and PLina-g-polynBMA (PnBMA) graft copolymers. The polymers obtained were characterized by proton nuclear magnetic resonance ( 1 H NMR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC) techniques. Microstructure of the graft copolymers was observed by using scanning electron microscope (SEM). Graft copolymers obtained contained polymeric linoleic acid in a range between 8.5 and 19.3 mol percent (mol%). PLina-g-PS, PLina-g-PMMA andPLina-g-PnBMA graft copolymer samples were also used in cell culture studies. Fibroblast and macrophage cells were strongly adhered and spread on the copolymer film surfaces. These newly synthesized copolymers were tested for their effects on human blood protein adsorption compared with PMMA graft copolymers containing polymeric soybean oil and polymeric linseed oil; interestingly we observed a dramatic decrease in the protein adsorption on the linoleic acid graft copolymer, which is important in tissue engineering.
SUMMARY: Poly(3-hydroxyalkanoate)-g-poly(ethylene glycol) crosslinked graft copolymers are described. Poly(3-hydroxyalkanoate)s containing double bonds in the side chain (PHA-DB) were obtained by co-feeding Pseudomonas oleovorans with a mixture of nonanoic acid and anchovy (hamci) oily acid (in weight ratios of 50/50 and 70/30). PHA-DB was thermally grafted with a polyazoester synthesized by the reaction of poly(ethylene glycol) with MW of 400 (PEG-400) and 4,49-azobis(4-cyanopentanoyl chloride). Sol-gel analysis and spectrometric and thermal characterization of the networks are reported.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.